Question Locked

RAM, how fast should I get?

0 helpful
17 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi, I'm trying to upgrade my RAM, my pc is a Dell Dimension and it currently has 1 gb (2x512) DDR2 with a speed of 533 mhz, I installed 2x2gb of 6400 (800mhz) and the darn pc went b.s.o.d and wouldn't boot again, even after returning to the old RAM. One rebuild later (thanks Dell for putting an image of the original build on the HDD) and I have found that the RAM only shows 1.4 gb, no matter what order I put them in, with or without the old RAM. My question is this, Did the fast RAM cause the blue screen and subsequent need to rebuild and should I be sticking to 533 mhz? I know about installing in pairs, maximum size etc, it's just the speed issue I'd like to know about

Ta

oops, totally forgot to add the 'spec' list at the bottom, well, it was about 5:30am when I wrote it.

Dell Dimension 5150
Windows XP Home V2002 SP3
Intel Pentium 2.8ghz

17 replies

by older mycroft

What is the model number ?

Also what operating system do you have ?

by craig.barratt

oops, totally forgot to add the 'spec' list at the bottom, well, it was about 5:30am when I wrote it.

Dell Dimension 5150
Windows XP Home V2002 SP3
Intel Pentium 2.8ghz

by ---tk---

If you up grade to 4 Gigs of RAM, you will only see 3.2 Gigs. Its a known issue with the 32 bit OS, it has to do with memory allocation... and there is no way to get around it, unless you use a 64 bit OS.

by craig.barratt

Cheers, if only there was a decent 64bit OS, oops, I've done it now!!!

by oh smeg

I know what it is but I'm not telling anyone as they will start to use it and I'll loose that advantage. :^0

Col :p

by oh smeg

The Biggest you can use are 1 GIG Sticks.

This may be the issue with the system reporting the wrong amount of Installed RAM.

Details for VS1GB533D2

Memory Type
DDR2-533 (PC2-4200)

Size 1GB

Latency 4-4-4-12-2T

Format 240-pin DIMM

Heat Spreader None

You should look in the BIOS to make sure that the RAM is correctly Identified before allowing the system to boot.

According to the Dell Web Site the Biggest sticks of RAM that they sell for this unit are 1 GIG Sticks as well.

http://accessories.ap.dell.com/sna/category.aspx?c=au&l=en&s=dhs&cs=audhs1&category_id=4325

With this in mind I would say that Memory Mapping Errors was what caused the system to BSOD out and corrupt the Windows Files.

Col

by craig.barratt

give me a chance there fella! I'm getting round to all contributors ;-)

Thanks for your input, Isn't this site just awesome!

by craig.barratt

I guess that'll teach me to listen to PC World staff! (i don't know why I did) fortunately I didn't lose too much data as bartpe was able to assist with the retrieval of my stuff.

Ta for the advice

by craig.barratt

Hi all, thanks for the advice, I've clicked my way to crucial and got 2x 1gb 533mhz, If I need more than that I need a new PC first haha!

by older mycroft

It's just the smelly aftershave that gets up my nose!! :^0 ;)

by oh smeg

I'm at a loss here as I don't use any Aftershave. I haven't for years.

Having a full beard to help protect my face from [b]Skin Cancer[/b] negates the need to use Aftershave. So something else must be getting up your nose or maybe you've mistaken the smell of your own aftershave. :^0

Or it just could be that I'm much [b]NICER[/b] than you are. :0

Col ]:)

This discussion is closed to new replies.