Windows Forum

Ask something
Discussion Locked

RAS

0 helpful
7 replies

by seanl

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have been running a win2000 RRAS server for a month now. User dials in via modem and server calls them back. The server has a BRI card(ISDN). I recently applied SP4, and ever since applying it, the events logged in the system log state:
Event Type: Information
Event Source: RemoteAccess
Event Category: None
Event ID: 20048
Date: 2003/08/20
Time: 11:41:01
User: N/A
Computer: servername
Description:
The user domain\username connected on port ISDN6-0 on 08/20/2003 at 11:04am and disconnected on 08/20/2003 at 11:41am. The user was active for 35 minutes 7 seconds. 0 bytes were sent and 0 bytes were received. The port speed was 41296. The reason for disconnecting was user request.

1. The problem I have is the section "0 bytes were sent and 0 bytes were received." I sent a few meg each way, but it still shows 0 bytes transmitted. Before loading sp4, i received the info in the event log.
2. Ever since installing the SP4, the transfers seem to take much longer, eventhough the connection speed is the same.

There are no errors in the event log

Any help will be much appreciated

7 replies

by seanl

a little more info - If i go into the RAS manager - ports, and monitor the isdn port, it shows all the statistics. There are no crc errors or any other errors for that matter.

by seanl

More info: If the remote user is connected, and I disconnect the user on the server side (via ras manager) then the statistics (bytes sent and received) are shown in the event log.

by king hollis

Are you saying that you also received these error messages BEFORE installing SP4? Regardless, I would suggest rolling back SP4 as I have heard of admins having nothing but problems after applying SP4.

This discussion is closed to new replies.