Discussion Locked

RAS on W2K , can't see any PC with W98

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I finaly managed to configure W2000 Server, everithing is running OK, DNS, DHCP, WINS. I have a mixed network (W98, W2k. But when I try to make a Remote access, the server assign a DHCP Server (255.255.255.255) that isn't in use, besides the Lap-topconnected by RAS can't see any PC with W98, only see the server and the W2k Professional.

I'm out of ideas, What can I do?

rodriguezcervera@msn.com

3 replies

by drdon

Check your version of Dial Up Networking (DUN). There is a MS upgrade to the DUN. If you are running Active Directory (AD) you also need the AD client from MS. Both are painless upgrades and take very little time. You should see an improvement.

Also, if you do VPN - you will need these upgrades.

This discussion is closed to new replies.