Question Locked

Rebuilding to a larger array?

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi All.

We are currently running a RAID 5 configuration on one of our servers and each drive is 36.5GB. If we were to slowly replace/rebuild each drive with 70GB ones, will the array expand itself to the larger sized drive? Or would this have to be done using the array configuration software? The server is a HP Proliant ML370 G3.

Any thoughts would be much appreciated.

Jason

3 replies

by oh smeg

The Array rebuilds the new drive to the existing size of the array. If there is any remaining space on the HDD it isn't used.

So from that prospective you'll need to go in and use the Array Software Configuration.

But I have also never worked with any HP Products like this.

Col

by fox2002152003

working on a RAID 5 if your original drive was 36.5gb and you raplaced with 70gb the system reads or restore the original size which is 36.5gb. i suggest you backup your system; break your existing raid 5 then replaced your drives with larger size and rebuild your raid 5 in that case the size will increase.

This discussion is closed to new replies.