Discussion Locked

reformat HD from NTFS back to FAT32

0 helpful
12 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
1.3 gHz Athlon, 40 gig Maxtor hd, once had windows98 with upgrade windowsXP.... then reformated drive to use NTFS (full install) from the WindowsXP (update) CD. It seemed like the reformat was working til it rebooted now I get message "Windows could not start because the following file is missing or corrupt /windows/system32/config/system." I was worndering if i should go back to FAT32 but i no longer have that option when installing the windows XP disk. I tried a NEW Western digital drive and got the same result. However when i first formated the WD drive it gave me the option to format&partition the Maxtor drive... When i tried this i got the message that the NTFS had an invalid signature and i was to use NT disk adminstrator (what the heck is that?!) to fix the problem. I no longer can get the computer to redo this problem.... Hmmmm I am at wits end... My main goal is to get WindowsXP back and running on my computer, no matter what it takes ! lesson learned "if it works dont mess with it!"

12 replies

by dave.osborne

Use a win98/me boot disk to run fdisk. Run "fdisk /mbr" at the C: prompt. Then run "fdisk" at the C: prompt and follow the directions to delete the current partition(s) and reboot. Run "fdisk" again and create a new partition using all of the available space, all 40 gigs. It will create a partition in FAT32. Reboot once more and format the drive by typing "format c: /u" at the C: prompt ... or you can have the win xp setup format the drive for you. Once win xp is installed, if you want toconvert to NTFS, open a command window in win xp and enter "CONVERT C: /FS:NTFS" and reboot.

Hope this helps.

-Dave

by william jay

Howdy,

Unfortunately answer number one won't work. Win98's fdisk is lame when it comes to NTFS. Boot from a linux CD and use it's fdisk to change the partition ID to FAT32, then reboot with win98 and format it. After that, install XP and tell it to leave the file system intact . . .

by thechas

I'm stuck on why the NTFS format failed.

I would boot up from a W98 startup disk,
Run fdisk with the MBR switch fdisk /mbr

Run fdisk again, and delete the non-DOS partition.

Boot from the XP CD, and run setup again.

Now, does your motherboard have a drive controller that is not supported by XP where you would need to load the controller driver during XP installation?

Or, was either drive setup using the drive manufactures floppy disk?

Either could explain why you had problems formatting the drives from the XP CD.

Personally, either drive is large enough that I would stick with NTSF for my file system.

The ONLY 'good' reason to use FAT32 is if you need DOS mode access to the files on the drive. Or are setting up a dual-boot PC using Windows 9X or DOS as another OS.

Chas

by jimmy

SImply insert a WIndows XP disk and boot from CD ROM. Then delete all partitions back to a fixed disk. Do not let WINXP format the drive however.
Restart the system with a windows 98 boot disk inserted and run fdisk and format the HD this will makeit a FAT32 drive.
Hope this helps

This discussion is closed to new replies.