Discussion Locked

Reformatting your HD

0 helpful
12 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I presently have two partions on my hard drive .
one ( 2 GB) is FAT 32 and has windows 98
the remaining is NTFS and has windows NT.

I want to reformat my whole disk nad have only Fat 32. Could you please help ?

12 replies

by syscokid

1. Create a Windows 98 startup disk (Cntrol Panel, Add\Remove programs, Setup tab).

2. Boot from floppy.

3. Run fdisk and delete the existing partitions. This will delete all data on all partitions. Back up first if you need to.

4. Still using fdisk, create a primary partitionand make it active. If your drive is over 2 gig, check enable large disk support.

5. Then format C: /s to format and make the disk bootable.

by ashishshekhar

Tried that, but it did not work.
When I try to delete extensions, it says there are logical drives. When I try to delete logical drives, it says no logical drives defined.
To top it, I cant delete the primary partition when there is an extn !
Am fixed.. please help

by rockyolson

Hi try this, get yur disc's for nt and start an install go through all the way it will ask you if you want to install ntfs or fat 16, choose fat 16 and it will reformat to fat 16 reboot let everthing come up once up and running then shut down and put in your windows start-up disc and fdisk all of your partions. Reformat and choose use all. I guess you know the drill here. Give a try adn let me know. rockyolson@charter.net

by ashishshekhar

Thanks.I worked this one out in a different way... I reinstalled NT and when it asked me to select the Partition, I simply chose the delete partition option.
I then used FDISK from the windows Boot disk and worked it out the normal way.

Rgds
ash

by dmiles

NTFS is difficult to delete boot the system in NT,from the Start>go to disk administrator and select the partition and then select delete,reboot the system and then you can use FDISK,to delete the FAT32 partition.

by ashishshekhar

Thanks.I worked this one out in a different way... I reinstalled NT and when it asked me to select the Partition, I simply chose the delete partition option.
I then used FDISK from the windows Boot disk and worked it out the normal way.

Rgds
ash
Rgds
ash

by markchen

You can use the following program: Partition Magic 5

I have use it in the past and it works great. You will keep all data on the FAT32 drive. Partition Magic 5 work with many file systems, from FAT32 to NTFS to UNIX

Hope this helps

by ashishshekhar

Thanks.I worked this one out in a different way... I reinstalled NT and when it asked me to select the Partition, I simply chose the delete partition option.
I then used FDISK from the windows Boot disk and worked it out the normal way.

Rgds
ash

Rgds
ash

by ashishshekhar

Thanks.I worked this one out in a different way... I reinstalled NT and when it asked me to select the Partition, I simply chose the delete partition option.
I then used FDISK from the windows Boot disk and worked it out the normal way.

Rgds
ash

Rgds
ash

This discussion is closed to new replies.