Question Locked

Remove drive reference from registry

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Folks:
A vexing problem: installed new SATA hd in server (set BIOS to make it boot disk) & did clean install of XP Pro SP3 to it. After install, boot drive was N: instead of C: -it worked fine, so I didn't care. Some months later, on start-up, XP spontaneously renamed the boot drive C: but left all N:\ references in registry. PC boots ok, lots of apps don't work since they're linked to non-existant N:. I need to change ALL references to N: in registry to C: so apps work again. Many won't uninstall/reinstall since they can't find N:\ files.
I appreciate your help.
RcP

7 replies

by rob miners

be quicker to remove all drives and move the drive to the lowest Sata port. Wipe the drive and reinstall.

by rcp2215

I'm hoping for a software / hack solution before I resort to wiping drive... even tho I suspect I'll end up having to take your suggestion.

by rob miners

is to do a search in the Registry for N: and make the changes. Good luck.

by rcp2215

Jacky - thanks again. I tried that first, but there a thousands of values and hundreds of keys. XP Pro SP3 doesn't have find-and-replace function, only find - then YOU manually change each one!
I am going to do what I should have done first: unplug the other drives, wipe the SATA drive and reinstall XP, then let it find the other drives. Fixing the system will keep me busy Sunday - very busy.

by rcp2215

Jacky:
Decided to try one last google hunt for software -I found it! You MUST get this free utility- it did more in 30 seconds than I got done in 2 days of manual modifications.
Download regreplace12f.zip & install. It changed 982 N:\ to C:\ in seconds, leaving me to manually change/delete the ones that were restricted. NO MESSY REINSTALL! System is as if nothing had happened!
Thanks for your support.

This discussion is closed to new replies.