4 replies
by ryuming Accepted solution
by lukes_weatherlight Accepted solution
Hello,
Reseat the battery again but wait around a couple of minutes. The cache needs to be cleared. Also make sure the mains adapter isn't in the back when you do this as power is still being channeled through and can keep the cache alive as it were.
You COULD try installing XP from a USB flash stick or a SD card, but you need a good motherboard and also will need to set USB or card reader to your default boot options.
Finally maybe all Acers come with a preset password and you might find the password in the documentation or something?
Was it pre-owned or new?
Hope some of this helps
by cmiller5400 Accepted solution
The members of TechRepublic - A Resource for IT Professionals, will not assist anyone in the recovery of lost passwords. You may have a legitimate reason to recover a password. However, we cannot verify your motives and will therefore not assist anyone in what may be an attempt at gaining unauthorized access to a computer system. Due to the open nature of this forum, any assistance given to help circumvent security measures, even for legitimate purposes, would be available for unscrupulous individuals to use for illegitimate purposes. This is a risk that we the members of TechRepublic will not take. Please do not ask questions of this nature on TechRepublic.
If you have a legitimate need to circumvent a password scheme, please contact the vendor for the software / hardware and request their assistance. E.g. Windows XP password recovery issues should be taken up with Microsoft's technical support, Phoenix BIOS password recovery issues should be taken up with Phoenix Technologies, etc.. To those viewing this post: Please DO NOT respond any further to this thread.
This template has been released under the GNU public license and you are encouraged to use it as a standard reply for questions of similar nature, provided that you make any modifications available to other users.
by oh smeg Accepted solution
If you don't know it then Suffer.
But as for the HDD not being recognized by the XP installer this is because it is a SATA HDD and XP doesn't Natively Support these. You need to install a Driver.
At the first blue screen on the XP Installer you need to press the [b]F^ Key[/b] and then when the Installer does its thing and requests you for a SCSI Driver you need to insert a Floppy with the SATA Driver copied to its Root and pres enter.
Of you don't have a floppy you can make a Slipstreamed Install Disc by either following the directions in this TR Article & I'll include the Downloadable copy as well
Or use a Software application like nLite
Col
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending