Question Locked

Removing network printer from Vista

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Guys, I'm not an expert with a PC by any stretch, but I understand some of the more technical elements.

I have print server with a USB printer attached to it that has previously worked fine. The printer was added to the Vista machine by way of the printer server name - in this case \\linkstation\lp.

Recently the printer stopped working, and in an attempt to fix the problem I have removed the printer, deleted the registry entries for the driver, port etc at these locations:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\ Windows NT x86\ Drivers\Version-2\

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Printers\

HKEY_CURRENT_USER\Printers\Connections\

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Providers\ LanMan Print Services\Servers\\Printers\

I have then rebooted the PC, and attempted to add the printer via the print server's IP address - in this case \\10.22.0.3\lp. Unfortunately, when the printer is added the printer status is constantly 'deleting' and when I try to open the printer to view any documents in the print queue it instantly closes itself back down.

Can any of you guys help me out here - I'm not sure what else to try!

Thanks in advance.

Chris

2 replies

by seanferd

Next time, remove the printer by uninstalling it in Device Manager and the Printer control panel, or via the installed printer software.

This discussion is closed to new replies.