Question Locked

replacing 10GB drive with 160gb drive

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I've tried to help a Vietnam VET friend in replacing his old 10GB drive with a 160gb drive in his old XP Pro 500MHz Dell PC, tried loading Win XP Pro, but it won't. I took it home then put it in my e-Machines 1.4 GHz PC, loaded up Win XP Pro, took it out, put it back into his ... same problem. Any ideas will help.

3 replies

by computercookie

if not I'd trystarting the PC with the new drive as a slave and ensure that the bios will recognise the 160GB drive.

What is the model number of the PC?

by thechas

Considering the age of a 500 MHz system, I suspect it may have a 40 or 80 GB hard drive detection limit in the BIOS.

3 options in order of cost / work:

Use the drive manufactures BIOS overlay utility to set up the system to use the big drive.

Check with Dell for a BIOS update the SPECIFICALLY addresses hard drive size limits.

Install a PCI IDE adapter card.

If not for the age of the system, I would go with the IDE adapter card as the best solution. For cost and speed of getting things working, use the drive manufactures BIOS utility.

Chas

This discussion is closed to new replies.