Question Locked
0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a windows 2000 server with a raid setup. i am replacing the 5 18 gig drives with 5 72 gig drives. i have a unitrends disk backup server that will reinstall the server in no time but how do i increase the volume sizes. i have heard that i can use partition magic once the server has been reinstalled and i have also heard that you cannot use partition magic on a windows 2000 server.
2 replies
by greenc Accepted solution
Clarifications
by oh smeg Accepted solution
As I had done it on numerous occasions with Resizing RAID Arrays after upping the size of the individual drives.
Depending on the type of RAID you are using things can get complicated though. I try to Clone one of the RAID Disc's and then resize the Disc and then when that is using all of the available HDD rebuild the RAID.
If you are using more than 1 RAID Array on this server though it gets more complicated.
Col
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending
Question Unanswered
How Can IT Teams Detect Hardware Bottlenecks in Business Networks?
0 helpful
0 replies
Question Locked
Using multi-NIC setup for NAS + router — better than VLAN?
0 helpful
4 replies
0 helpful
5 replies
Question Locked
Unknown device connected to my network
0 helpful
2 replies
Question Locked
How to change public IP without ISP?
0 helpful
2 replies