Question Locked

Replacing Windows Vista

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
How do I replace Windoes Vista Home Basic on my new computer with Windows XP-Pro?

11 replies

by p.j.hutchison

Boot off the XP CD and delete any partitions, then create a new partition (C:) and then install Windows XP as normal.

by fbudelman

Reset the boot drive to the cd and inserted the XP install disk and got Vista again. Tried to re-format the hard drive (desperate measure for sure) but Vista would not let me. Tried to make a new partition to install XP there but Vista would not let me. Tried to load partition magic but Vista said something about this being dangerous and would not let me install it.

Of course, Dell did not put a floppy on this system.

My list of Vista problem is long and extremely annoying. It does not support my peripherals. It does not support my 3rd party software. Etc. Etc. Etc.

I have this perfectly good Windows XP-Pro install disk (legal and everything) that I cannot get to install.

Is there a way to bbot in safe mode and get by this annoying OS?

by craig herberg

If you set the BIOS to have the CD boot BEFORE the hard drive, when you have a bootable CD in the drive when you turn on the computer, the computer should give you the opportunity to PRESS ANY KEY TO BOOT FROM CD. Once you boot from the original Windows XP installation CD, you should be home free.

Craig Herberg
http://info-safety.com

by a_p_muller

Usually preinstalled Windows is split into two partions, one being the recovery partition. That recovery partition is what prevents you from installing XP. Use the freeware program called KILLDISK (www.killdisk.com) to delete all data and partitions on your hard drive. Then you will be able to install XP.

by craig herberg

I would not count on any backward compatibility with the MS Files and Settings Transfer Wizard, so make sure to copy off your My Documents folder and anything else you need to retain, such as Outlook .PST files, Quicken files, favorites/bookmarks, etc., BEFORE beginning the reinstallation mentioned in previous post.

Good luck.

Craig Herberg
http://info-safety.com

by a_p_muller

What type of PC do you have? I have replaced Vista with XP on at least 20 PCs. I used Killdisk to clean out the hard drive, then simply inserted Windows XP Pro SP2 into the CD-DVD drive. Make sure you make the CD-DVD drive the boot drive during install. I have never had problems with desktop PCs. Laptops are different, especially if you have built-in wireless.
Try using Device Manager, or better yet, download the freeware SIW (System Information for Windows) which will give you the manufacturer of every component in your system...in case you might need some drivers or wish to update your drivers.

by ddigenova

if xp does not see any hard drives.
go into the bios and disable the native sata setting

by engbers

thanks,disabled sata it works,have XP installed ok. But now sound driver,DVD drive,wireless do not work,tried to download from Compaq webside,does not work.any solution how to get suitble drivers

by abrar

I just purchased a new Fujitsu Siemens AMILO PI2515 laptop with VISTA on it. And it starts very very very slow, so I decided to install windows XP, but even after repartitioning and formatting and also used Killdisk but it isn?t installing windows XP, it always stop on the blue screen where from XP starts it?s installation after copying the driver files. So please help me if you know some solution. Thanks!

by p.j.hutchison

Sounds like something serious, I would take it back to shop as it is not working as expected...

This discussion is closed to new replies.