Question Locked

Resizing partitions in Win XP with Pointsec installed

0 helpful
29 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Is this possible?

The nearest answer I have found is to decrypt and uninstall Pointsec, resize partitions then reinstall Pointsec and re-crypt.

This is rather time consuming, and while the point does not come up too often it would be nice to just resize the partition and be done with it.

With Vista the disk manager permits you to resize partitions on the fly, even with Pointsec installed.

Any thoughts on this.

29 replies

by rob miners

About File Systems/Volumes/OS Upgrades
Resizing Partitions and Using Disk Management Features/Utilities
Never use software that alters the workstation's disk partitions when Pointsec PC is installed on the
workstation.
If you need to resize a partition, remove Pointsec PC completely first and then resize the partition.

http://dl3.checkpoint.com/paid/6b/Pointsec_PC_6.3.1_HFA6_Release_Notes.pdf?HashKey=1241311451_20e966e2a4e4cb06a71949500081ed31&xtn=.pdf

by michael jay

a lot today and did not find what you linked to, thanks, a lot of good info.

by rob miners

actually used it but I would be carefull not to upset it. Sometimes you have to go the long way around and it just can't be avoided. :D

by michael jay

not read all you sent that the encryption is strictly the data. Will read it in full tomorrow.

If that is the case, all resizing is doing is adjusting the address. This does not seem to me to be a breach of the security.

Someone must have a resize program that will fly under Pointsec on an XP PC. Vista partition resize works with Pointsec.

by rob miners

a test environment and use Partition Magic V.8 if you have access to it. :D It works a treat with XP. ;)

You must be in stealth mode as you are not showing up in my contacts list. :D

by michael jay

In the past, do not have V.8, before I spend the bucks I would like to know if it can do Pointsec.

An older version of Partition Magic does not work, Ubuntu 8.10 does not even see the partitions, Ubuntu 9.04 sees the partitions but cannot resize, XP pc comes up unbootable.

As for stealth mode, I do not know. I can never tell when Boxie is on line till she posts. You mean that I am invisible as well?

This could help with the Hal 9000 battle.

Crap, I just revealed my position.

by michael jay

where it says anything about Pointsec, but in the past I when using Partition Magic it does a reboot and resizes outside of Windows, that is also outside of Pointsec, the same problem with Acronis, you end up with a unbootable pc.

What the heck, I will try it. But that will be on Monday.

by rob miners

Partition Magic is actually invoked from the autocheck autochk * feature when resizing a drive. It adds its commands and runs before the OS is restarted. I really hope that it works out OK for you. :D

by michael jay

and that is what I thought, if it starts before the os, it will not see the hard drive.

Can you see me now?

by rob miners

and that is a bummer if it relies on seeing the Hard drive. I can't think of anymore suggestions that may work. One of the other members may have a trick up their sleeve. ;)

by michael jay

Pointsec also disables chkdsk, and Diskeeper boot time activities.

Perhaps hardware encryption is a better way.

by rob miners

I will have to leave that thought up to you but you may run into similar problems. Never having used it I'm unaware of the steps involved in uninstalling it and then having to reinstall. It sounds like a PITA which ever way you go about it. ;)

by michael jay

this is not something that comes up every day, but from time to time it would be so nice to just resize partitions with out any problems.

To decrypt a Pointsec pc of about 100 gig takes about 5 hours, my typical solution is to reimage, about 3 hours with data.

Would indeed be cool to have a quicker solution.

edit to fix a size issue, meg or gig?

by michael jay

When you see some good info grab it, do not expect it to be there later.

by rob miners

you pop up out of nowhere. It does seem strange that it could be accessed before though. :D

by brokndodge9

have you given gparted a try, it's my all in one partition tool and they have built a live cd. dunno, but might try it on a test machine.

by michael jay

I mentioned Ubuntu, guess that I should have said gparted or the partition manager, anyhoo these do not get it done.

by rob miners

I almost forgot that PM8 has been replaced with this.

EASEUS Partition Manager Home Edition

Freeware

Edit: with PM8 you could create a couple of boot disks. I don't know if this will allow it but if it does you will be in an environment prior to the OS. Whether it will see it is another thing.

by michael jay

Still got a few thumbs left in case anyone has another idea.

by rob miners

If you can do it with Vista you can try this on a test System. Use a Vista DVD or download and create this Recovery CD you will be able to use Diskpart to manipulate your Partitions. Follow the directions below and you should be good to go.

The Windows Vista Recovery CD can be used to Boot your PC. Check your BIOS settings to make sure that you are booting from the CD first.

Creating a Windows Vista Recovery CD

http://blogs.techrepublic.com.com/window-on-windows/?p=622

Download from here:

http://coblitz.codeen.org/neosmart.net/downloads/guides/Vista_Repair/Vista_Recovery_Disc_x86.iso

Boot from the CD and on the first screen click Next, click Repair your computer, click Next and select Command Prompt.

Type in DISKPART and press Enter. This opens the Microsoft DiskPart application. You need to select the active disk, so type in:

list disk

The primary disk is generally Disk 0, so type in:

select disk 0

Now we need a list of volumes on this disk, so type in:

list volume

In this case Volume 0 is the one we want, so type in:

select volume 0

select part 1

Partition 1 is now the selected partition

Now type in:

shrink

DiskPart will go off and reclaim as much of the drive as it can ? you should get at least 50% of the space back.

Now type

EXIT

Edit: missed a command

by michael jay

but I do not believe that it will work as you are booting the machine without getting to Windows, only in Windows will you have access to the drive. And that is why Vista disk manager can resize partitions.

Looking thru the documentation as this hard head should have done first I read this:

Resizing partitions ? Never use any disk-partition editing software
with Full Disk Encryption installed on the workstation. If you need to
resize a partition, remove Full Disk Encryption first, and then resize
the partition.

So to continue to be hard headed, is it possible to get the Vista disk manager on XP as it can resize partitions on the fly without a reboot.

Guess I should start that as a new Question.

Or just give up on this idea.

by rob miners

I would be removing the Encryption before resizing the Partition.
Diskpart in XP is 160K 14-4-2008 and in Vista it is 129K and 13-12-2008. I really doubt that it would work swapping them over. Having said that there is nothing stopping you from trying it. LOL

This discussion is closed to new replies.