Desktop
Recently installed a new SCSI card with onboard bios, this resulted in a conflict with the System //board extension PnP bios, this then interfere with the operating of some plug and play devices, any solutions would be welcomed,
Michael
by william jay
Howdy,
Without more details as to OS and hardware, it's difficult to give you a succint answer. If you are using Win9x or ME, try this . . . open regedit, navigate to HKEY_LOCAL_MACHINE, and delete the ENUM key, reboot and Windows will re-installall the hardware resources, hopefully in a more sharing way . . .
Well I'm running Windows 98SE, on a pentium 166, 80MB ram, 256k cache, the machine is Hewlett Packard Vectra and the card is a Advansys AHA-1522A, anything else you need to know just ask
Michael
by william jay
Howdy again,
I am curious to know two things now, have you gone into the machine's BIOS to set the IRQ's apart manually, and did you do what I originally suggested with the registry?
Yeah, tried that but it didn't work, and with it being a Vecta, the IRQ settings are more difficult to set-up, I eventually got them reset manually though, I've now done a little bit of work on and the card isn't registering properly, it'll run the SCSI drive but not the CDROM or scanner, no matter what I set the terminators to,
The driver is the right one for the card, I've checked all that out and got the manufacterer's one off their download site,
Michael
by william jay
This discussion is closed to new replies.
Sort by Trending