Question Locked

Restarting loop

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Hello. The problem is that my computer wont start up not even on Safe mood or any of the five options they give me. The problem started after i had installed a software and i needed to restart, so i did. After it restarted nothing came on the screem just my background, no "Start" no nothing. The only thing i could do was CTRL + ALY + Delete. So from their i connected to the internet trying to get some help. Well while searching, my computer stoped working, so i decided to turn it off. After that my computer loads to the five Safe Mode options but none works. It just restart all over again to the same place. I also tried to press F8 to re-boot but nothing. Its an HP computer two years old. Any help on this please. All i want to do is remove all the data i need and then i would re-boot the entire computer.

4 replies

by oh smeg

Or you will loose all your data as th Encryption Key will be destroyed.

http://tinyurl.com/g4bv8

Just a hint if you want an answer you need to supply much more information like the OS in use the Patch Level that it is at what you attempted to install and so on as this is impossible to answer without that information.

Col

by luis0724

ANOTHER THING IS THAT AFTER THE WINDOES XP LOGO A BLUE SCREEN APPEARS AND DISSAPEARS, TOO QUICK TO READ.

WHAT I TRIED TO INSTALLED WAS NERO 7!! ALSO IF IT MIGHT HELP I THE CPU WAS AT 147F... I DONT KNOW IF THAT IS GOOD BUT IT SEEMS HOT FOR ME....

by oh smeg

If you can hit the Pause Key just at the right time you can pause the system so you can read the BSOD. That is really need as it has an error message that makes sense.

As you are unable to load Windows at all I would suggest a In Place Install to repair the System Files. Only problem is that if you have been connected to the Net while in Safe Mode it is almost 100% certain that you will be infected as in Safe Mode with Networking No AV product is launched so you may carry an infection across after the Repair that is not possible to remove.

Anyway a In Place Install is possible and the M$ supplied directions are here

http://tinyurl.com/g4bv8

Really if you do not have a Backup that you know works it would be better to use a new HDD to install the OS to and then Slave the existing one to recover your data. After that is done you could wipe the original HDD and then format it up and use as a storage drive or whatever else you want.

If saving your Data isn't important you can just wipe the HDD and reload though I wouldn't recommend installing Nero till you are sure that the System is working properly. If you need a wiping utility there is one here that you can download & use

http://tinyurl.com/4rfur

This will write zero's to every sector of the drive and destroy anything that is left on the drive.

As things stand Nero 6 & 7 work on XP and Nero 7 works with Vista.

As for the Temp you will need to remove a cover and look to see what is the problem with the Heat Sink on the CPU and see if there are enough case fans to force air flow through the case.

Col

This discussion is closed to new replies.