Short overview-
1) Get XP drivers for your laptop
2) Get Service Pack 3 for XP
3) Get NLite, 7-Zip and EasyBCD
4) Get XP install disks and a COA
5) XCopy XP install files to C:\WXP
6) Extract XP drivers to C:\WXP\DRIVERS
7) Copy Addon files to C:\WXP\Add
8) Run NLite to make custom boot iso image
9) Burn the iso image to a DVD or CD
10) Shrink your Vista partition
11) Put new DVD in new laptop and reboot
12) Enter the BIOS
13) DISABLE native SATA support
14) Save your BIOS settings
15) Boot from DVD
16) Install XP in unpartitioned space
17) Install EasyBCD to XP
18) Install .NET 2 if not already done
19) Run EasyBCD to restore dual boot
20) Compare performance in Vista and XP
21) Contribute to the folks who created NLite and EasyBCD!
(I am not related to them in any way.)
Expanded where needed:
1) Get XP drivers for your laptop
2) Get Service Pack 3 for XP
3) Get NLite, 7-Zip and EasyBCD
4) Get XP install disks and a COA
5) XCopy XP install files to C:\WXP
XCopy copies directories and all the files in them. For arcane DOS reasons, copy XCopy and rename the copy MCopy (Google it if you want to know why.) Then use the /v switch to verify the copy, /H to copy hidden and system files, /E to copy directories and subdirectories, /K to retain attributes, e.g., read only . So assuming your DVD/CD drive is G:, you want to open a DOS window, and type (upper/lower case is ignored):
MCopy G:\*.* C:\WXP /V /H /E /K
This will take a while.
6) Extract XP drivers to C:\WXP\DRIVERS
(You may need to install 7-Zip)
7) Copy Addon files to C:\WXP\Add
8) Run NLite to make custom boot iso image
9) Burn the iso image to a DVD or CD
Help here:
http://neosmart.net/wiki/display/G/NeoSmart+Technologies+Guides
Get NLite! http://www.nliteos.com/guide/
It will let you install service packs, drivers, and ADDONS for other software like FireFox, Thunderbird, AVG Antivirus AUTOMATICALLY during the install of the operating system! This will save you hours of installation time!!
There are GREAT instructions for installing XP with Vista at the EasyBCD site: http://neosmart.net/wiki/display/EBCD/Installing+XP+After+Vista
If, like most new PCs, you have a SATA drive, you need to load SATA drivers and DISABLE NATIVE SATA support in the BIOS. XP will *not* install properly otherwise. Get the drivers for your SATA drive from the website of the manufacturer of the chipset. (Look up your machine on the manufacturer's site, see who makes the video controller, and go there to get the newest drivers. Ditto for the video card.)
Download your new drivers into (for example) C:\WXP\drivers
If some of the drivers are .exe files, they may not run if you're not on the new machine. They check the hardware, and if it doesn't match, say so & won't run. To set up from another machine, get 7-Zip which can extract drivers from .exe files. Extract the drivers, figure out (from info on the manufacturer's site) which ones match your new hardware. If possible, you don't want to install similar but incorrect drivers.
If you have service packs, move them to the \WXP\SP folder.
Using NLite, prepare a custom boot iso with all the drivers, service packs, and other software you're going to want. Addons for other software can be found on the NLite site:
http://www.nliteos.com/addons/
and here
http://www.msfn.org/board/Application-Add-Ons-f132.html
http://www.msfn.org/board/Addon-list-t77509.html
http://www.msfn.org/board/Index-addons-31-01-2008-t85566.html
10) Shrink your Vista partition
In Vista-
Control panel
Administrative tools
Computer management
Storage
Disk Management
(Assuming you have one big disk, which usually has a big Vista partition and a relatively small recover partition on it.) Select the big partition and right click, choose shrink volume, accept max shrink.
After a few minutes, you should see a smaller Vista partition and unpartitioned space. You can leave this as is for now.
11) Put new DVD in new laptop and reboot
12) Enter the BIOS!!
13) DISABLE native SATA support!!
14) Save your BIOS settings
15) Boot from DVD
16) Install XP in unpartitioned space
This will take about an hour or two.
Boot into XP. Vista will be unavailable until you run EasyBCD.
(Firefox should have been installed to get stuff from the web if you're missing it.)
17) Install EasyBCD in XP
18) Install .NET 2 if not already done
19) Run EasyBCD to restore dual boot
Instructions here:
http://neosmart.net/wiki/display/EBCD/Recovering+the+Vista+Bootloader+with+EasyBCD
20) Compare performance in Vista and XP
21) Contribute to the folks who created NLite and EasyBCD!!
They just saved you hours of installing software and breaking your head learning to navigate bootloaders!