Question Locked

Router coonflicting IP address even though it isn't

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi..
r
I have a netgear DG something adsl modem/router..the router is configured with our IP address and also an internal 192.168.1.2 address..I have a win 2003 server with 192.168.1.1 my problem is everytime i restart the router the server comes up saying that there is an ip conflict with the routers mac address as the culprit..there is no reference to 192.168.1.1 in the router at all so i dont know why it is saying this..if i change the routers address to 192.168.5.2 it still says the same on the server????

I am trying to get port forwarding to work and it isn't working so im thinking that this is the reason so any help with this would be great..

Thanks in advance

Rich

3 replies

by dedlbug

This could be a couple things. First I would check your server's IP info. Make sure it is a static IP address and the gateway and router are entered correctly. Let's also change the Server IP to 192.168.1.200. (Because the router is most likely 192.168.1.1)

Now with the server IP changed, log into the router. Check the LAN setup section to be sure that the router's IP address is correct. (192.168.1.1 or whatever...just as long as it is not the same as your server but on the same scope)

Check to see if DHCP is enabled on your router OR your server. It can only exist in one place and the server will let you know if there is a conflict regarding DHCP. By default, the server is not configured for DHCP, but the router is. We want to make sure that the DHCP range in the router is correct and omitting the server address. For example: make the DHCP in the router - 192.168.1.10 - 192.168.1.199.

After these changes are in place, reboot the router and see if the server has internet. Now log back inot the router and check your port forwarding setup. Make sure that the desired port is forwarded to the correct IP address of the server (192.168.1.200)

Let us know if this helps and if we can help out further. =]

by rich.ball

Thanks for the advice but here is my issue's and setup..the server is static at 192.168.1.1..it is also a dhcp server with 192.168.1.10 to 254 range..the router is also a static address 192.168.1.2 with DHCP disabled on the router..the dhcp on server is correctly issuing addresses point the router correctly and dns..its just when i reboot the router it will give a ip conflict, it works fine and once the server is up there is no problem with internet for everyone..i just want to know why it is saying a conflict and still working..like i said even if i change the static ip on router to 192.168.5.2 so it is not even on the same network it still saying on the server that the routers mac is conflicting???

Its a strange one..

thanks in advance for help

This discussion is closed to new replies.