You say it's been working for over 2 months but you have a new Router. The CAT5 Cable from the Modem should plug into the WAN Port on the Router and then you need to set the security.
If you plugged the CAT5 Cable into one of the 4 LAN Ports you bypassed the routers Security so no matter how it was configured it should have allowed a Internet connection to both the WiFi & Wired Computers on the LAN but this connection may not prove reliable with the Router attempting to do whatever it was set to do it may cause Drop Out Problems.
This is taken for page 7 of the owners Manual PDF File posted here
http://tinyurl.com/5haumx
[i]1. In order to access the router, the browser settings must be correct. This is easy to check by starting up Internet Explorer and selecting ?Tools?
from the menu bar and then selecting the option ?Internet Options?.
2. In this window, go to ?Connections? and select ?Never dial a connection? or remove all connections listed in the field above.
3. At the bottom, click ?LAN Settings?, remove all ticks and click ?OK?.
4. Restart the browser to activate the settings[/i]
That only covers the Computer Settings for a Wired Network but is important.
Page 8 has the directions for setting up the WiFi Computers OS to reach the Router Tirelessly and is also important but as you say this is already working it should have been followed already.
Now we come the the Important thing setting up the Actual Router these are not Plug & play they need to be configured for your individual settings and the directions are listed on page 9 starting with how you get into the Routers Setup Procedure with a HTTP address of 192.168.50.1 and the routers Default User Name & Password You should change the Password when you setup the Router as a outside source could enter the Setup Procedure and change the way that this works on you so it would work OK for a time till the person outside cracks the router and alters the settings to suit their needs not yours.
On Pager 10 of the manual there is this
[i]Setting the Internet Provider (ISP)
Prior to setting the provider, make sure that the Internet connection is active without the Sweex Breedband Router. If the modem without the router
does not have an Internet connection, setting the router would be pointless. After all, the modem establishes the Internet connection and the Sweex
Breedband Router forwards this existing Internet connection to one or more computers in your network.
A total of 6 different settings are possible. We have listed these together with instructions on how to enter these. In order to find out which settings
correspond to your provider, you can consult the list with providers further down in this manual. The list consists of providers and corresponding
subscriptions. The applicable settings are listed for each subscription form. In the event that your subscription is not listed, consult your Internet
provider for the router settings which correspond to your subscription.
These settings need to be configured in your router only once. Regardless of the number of computers you connect to the router, the following
settings only need to be done on one computer. That is because the settings are not stored on the computer, but on the router.[/i]
If you have not done this you will not get a connection to the Internet but will get a internal network working.
As you say that the Network is working I'm assuming that the next step has been taken setting the DHCP that starts on Page 11 of the PDF File. Then on Page 13 you have the Settings for the PPPoE settings which you need to perform correctly with particular attention paid to the WAN as this is the connection to the Modem and the Internet.
[b]You will quite likely need the settings from your ISP here to set this correctly for their system.[/b]
Go through the settings and change them as required by your ISP and for your Security Model and then save the changes. This generally requires a Reboot of the Router which doesn't involve shutting down the Computer with the open Web Browser as it will acquire the connection after the Router restarts.
All pages numbers are the Page numbers of the PDF File not the manual as they are different.
I hope that helps you out.
Col