5 replies
by pc_master
by singh
by pc_master
by mshavrov
First of all, all your switches should be "managed" switches. If you have switch without ability to telnet into it or get information through SNMP - you can't do anything. In this case you can just count a number of ARP entries (MAC addresses) on your router. If you get number increased - you got a new PC.
If you lucky enough and you have all switches with SNMP capability, you can write some kind of script to retrieve port status and count "active" ports. I prefere UNIX (Linux, FreeBSD, etc.), but you probably can do it with another SNMP tools.
I believe, both methods will work, but first method, I think, easier to implement, since you will work with one device - core router.
If you have more questions or comments, just e-mail me.
Good luck,
Michael Shavrov
MCSE W2K, MCSE+I, CCNP, CCDP, Sun SCSA, Security+, ...
by rasman
www.solarwinds.net
get the 30 day trial of of the engineers edition.
Works great about 900.00 to purchase. if you are loking for full strength software take a look at Fluke network inspector. I use that in conjunction with a Fluke One Touch and get great results. IF you have a copy of Visio 2000 Enterprise you can get some of same types of configuration information. Did I mention that Solarwinds is a 0 day trial.
Later,
Ras.
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending