Hi all
I have a similar problem you just responded that jmil responded to, but need major clarification.
I am running on a Mac G4, but that should have no relevance to the hook up.
I have a D-Link DSL-604T Modem/Router. I just bought a D-Link DIR-655 router....my mistake, thought it was a modem/router. i have seen posts to the other gentlemen's similar problem, but here goes again. I would like to us 604T as modem only (or go out and buy a one), and use the DIR-655 as the Access Point . I followed te suggetsions on thsi thread, and I haev a Ethernet cable crossing over from the 604T and left, I tied to un-tick using the 604T as the AP, and then I lost all connection. Both units have multiple swotching or access ports so, I assuem I can just use an ethernet cable to feed teh signal from the 604T to mthe new 655....but the new 655 does not light uop the internet ligt...so I assume I am still running off the old 604T.
Second question my MAC G4 is not N compliant only G, but I knew that. Do you now of anyway I can take advantage of the mega speed this 655 router can give me. This issue is secondary.
Thanks in advance