11 replies
by 13seconds
by bmille14
The easiest way to accomplish what you are describing is to purchase a Cable/DSL gateway router. Belkin and US Robotics both make models that are between $60-80. With these, on one side you connect your cable modem to the router. The other side allows you to connect up to 4 10/100 ethernet connections. The router is configured through an easy to follow web browser interface. Provides NAT for firewall protection. The US Robotics model has a Printer Port and uplink port. Allowing you to use other hubs/switches to connect up to 254 computers.
Check manufacturer's website for more information.
by markshaff
pc anywhere is a good tool to use. you need the ip of pc.
check your services ensure that remote access is running.
also check to make sure you have right to dial in
by lynne
by markshaff
Make the windows 2000 is okay. Check all yous services, mainly remote you have to dig deep to actually get this to work right. Once you do you can share the service.
I do this with printers that are locally installed on windows 2000 machines and I have windows 98/me and others that may need touse the printer.
It took a while to configure.
All this can be found in the administrators tools.
by tmcclure
If you have a couple of extra bucks I'd go with the SMC Barricade 7004abr. Its fairly easy to configure, is fast and includes a built in print server. The only con its somewhat weak security.
If security is high on your list go with the Netear fr314.
by budelmjt
I have used the Linksys Cablerouter (4 port) with a hub in each of 2 rooms and a D-Link WAP access point with no ill effects and a great deal of flexibility. I, however, have not tried to use Win(me). I would not try, either, as I consider this osthe most brain dead of any MS has released in recent history.
This router seems impervious to probe attempts (I do not open incoming ports other than the default, though).
However, sharing with a plain modem on a dial up connection would need connection sharing on the machine with the modem (not on the other machine, that I have encountered). You then set the other machine up to point to the lan connection, and all should be well. This may not apply to Win(me), since I do not use it.
by petemcc
by tomsal
Exactly Lynne.
PCA is not even relevant in this situation.
The router is the way to go.
by tomsal
Exactly Lynne.
PCA is not even relevant in this situation.
The router is the way to go.
by jaymiller25
The reason why you're having problems sharing your internet connection between win2k and WinME is this: The ICS services differ on Win2K and WinME. If you had the same OS on each machine, it would work fine. ICS on WinME and Win2K just don't jive.
Go w/ the Cable/DSL router. that way, you don't have to worry about having both machines on, etc. And, you can expand in future to 4 PC's sharing the connection.
This discussion is closed to new replies.
Trending IT Employment posts
Sort by Trending