Question Locked

Routing between two LANS

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a private network with 245 devices connected to it. As you can tell we're running out of IP addresses on that subnet.

What i would like to do is begin to divide the company network into two subnets. Example.. 192.168.0.X and 192.168.1.X

We have a Server with two gigabit network cards running Windows Server 2003. I've set up routing and remote access before to accomplish this task but it was a number of years ago and i seem to be having trouble getting it to work correctly. The server runs DHCP and DNS for the 192.168.0.X network as well as functioning as a file server. The 192.168.1.X clients would be statically assigned IP addresses.

So i was wondering if anyone had a good link or can help me remember how to configure that server to allow comuters on the 192.168.0.X network to talk to the computers on the 192.168.1.X network without adding additional addresses to the client computers.

Everything i've found online explains how to configure RRAS for VPNs. I don't care about that, i just want the two networks to talk to each other without having multiple static IP addresses on the clients.

Any help is greatly appreciated. Even if there is something other using the Windows server, we are possibly looking at getting a Cisco VPN/Firewall so i won't be able to add a Cisco router as well to the bill. But if there are Linux solutions i'm willing to look at those as a second option.

Thanks in advance.

2 replies

by rustty

Super Netting is your cheapest and simplest option.
Can you explain a little about the network design
IE: are the 2 networks in 2 locations and connected via a gateway at each end
Or Are the networks in the same build on seperate floors and connected via switch port trunk
a little on the topology will make it easier to offer the right assistance.

This discussion is closed to new replies.