Networks

Ask something
Discussion Locked

Routing over Win2k RAS

0 helpful
1 reply

by prodrick

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

The local domain is on 192.168.0.xxx
The server is .10 and is running RAS
The pc at the remote site dials in and gets a 192.168.0.xxx address.
It also has a NIC with a local address of 192.168.1.xxx it has one other ethernet device on it that is a finger scanner and also has a .1.xxx address.
Is there anyway to have the finger scanner see the 192.168.0.xxx network? To see the company file server.
Do i need to use ADD ROUTE?

1 reply

by tbeecherii

Yes.

You are running the RAS server and client workstation on 192.168.0.0/24.

The scanning device sits on 192.168.1.0/24.

On the workstation that is connected to the scanner, you need to add a route to tell traffic on .1.0/24 how to get to .0.0/24. You also need to tell .0.0/24 how to get to .1.0/24 so return traffic makes it back.

This discussion is closed to new replies.