Question Locked

routing problem

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

this is the picture

PIX-----server on DMZ---- cisco 2611 router- ethernet connection ---- customer router--- customer server

the DMZ host has a persistent route configured to the cisco 2611.
no routing protocol running just static routes.
the problem is that intermittently the servers cannot connect and yet from the cli of the 2611 router I can ping the server of DMZ and the remote customer server
however they cannot ping each other, this set up has run happily for many years and just lately problems started, no changes have been made. they have had connectivity in the past and the first few times connectivity was lost we were able to restore it by reloading the 2611 so I cant see it being a config problem
I have logging enabled but there is no errors logged
I do not have access to the customer router but the problem appears to be at my side as I can ping both servers from my router
my router basically doesnt appear to be routing
the server at the customer end also has a persistent route configured point all traffic to the DMZ via his router.
Any troubleshooting ideas or help much appreciated
my router incidentally is running
c2600-ik9s-mz.122-16a but i dont think its a bug related issue
thanks
ROb

4 replies

by liame

Hmmmm

Does rebooting the 2611 fix the problem?

Does deleting and recreating the static route help?

Can you try a different router easily?

What is the power supply to the router like? It should be on a UPS.

Have you updated to the latest firmware on the router?

Hope something there helps.

by robknightly

thanks
rebooting the 2611 did fix the problem a couple of times but now it doesnt.
connectivity does come back seemingly randomly.
I havent another router handy with two ethernet interfaces unfortunately as that would be my preferred option.
I think i will probably upgrade the IOS and see how that works out
Thanks
Rob

by liame

Well unless the IOS is buggy and is effectively crashing or corrupting your route or the power supply is unreliable/playing up I'm a bit stumped.

If rebooting was fixing that points to the unit locking / crashing / gernerally getting it wrong on occasion... if rebooting it has stopped fixing it, it could be a little more serious... possibly its ram or non volatile memory is playing up. Without it reporting errors that is nly a guess of course.

I'm thinking beg / borrow / steal a replacement for testing. Sounds to me like you might have a duff router and its getting worse.

Good luck.

This discussion is closed to new replies.