Question Locked

Routing to internet through two routers

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi all, I'm trying to route to the internet from my FVS338 Netgear router, setup= Linksys router connected to internet ok, Netgear connected to linksys via its Wan port(192.168.0.254) Linksys Lan is:192.168.0.1. & the Lan port on the FVS is set to 192.168.1.1. My problem is I cant connect to the internet if I plug into the FVS lan port i.e. from 192.168.1.0 network.
Has anyone ever successfully used such a setup??
Thanks.

4 replies

by cg it

Linksys router address 192.168.1.1 mask 255.255.255.0
Linksys LAN addressing 192.168.1.X subnet mask 255.255.255.0
Netgear router WAN address. Must be on the linksys LAN subnet mask 255.255.255.0
gateway address is the Linksys router address.
Netgear router address 192.168.2.1 mask 255.255.255.0 [note: must be different subnet than Linksys]
Netgear router LAN addressing 192.168.2.X mask 255.255.255.0
default gateway Netgear router address.

DNS is ISP DNS servers for both routers and all clients.

by kamran

is ur using broadbad or tri-band its will work on broadband only

This discussion is closed to new replies.