Question Locked

Run fdisk /mbr from USB drive on sata or ide drive

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Is it possible to run fdisk /mbr from USB drive on sata or ide drive. We have several computers with a linux partition that was being used to connect to an update server and then a windows partition. We are no longer using the update server and I would like to stop the PCs from booting to the linux partition and then booting to the windows partition. I've run fdisk/mbr on several pcs and it seems to work. However several of the PCs don't have floppies and I was running it from a Windows 98 floppy. I have a jump drive and was hoping I could use it like a floppy and accomplish this task but it looks like its not going to work because it is running fdisk/mbr on itself instead of on the sata or ide drive. Any suggestions on how I can do this would be greatly appreciated.
Thanks

6 replies

by ic-it

If you are able to boot from the USB, you simply need to determine the affected drive letter. Then add it to the Fdisk /mbr command. Kinda like this;
Fdisk /MBR d:

by tebbec

Sorry I should have been more specific. The sata or ide drive has win xp ntfs partition. I don't think it will have a drive letter assigned in dos.

by ic-it

If so I would boot with the OS Cd and run the Recovery Console.
There you may run;
Fixmbr
Fixboot
Bootcfg /List or /Rebuild (if needed).

by tebbec

Was hoping to not have to carry around a CD and possibly forget it but it doesn't seem its possible.
Thanks

This discussion is closed to new replies.