Question Locked

sata/ata drives

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi, can someone help me please
I do apologize, this may have been posted and answered already../if so, could you please send me the links to it?/
anyway, here's my problem..
i have three harddrives, one sata and the rest ata../know it's maybe stupid, but at the moment i have no choice and i need them/

sometimes when i connect them all i get the clicking sound from the drive /prob the sata, as the win says, because of pagefile problems:event no. 51 or no. 7
1.when i connect only sata, works well
2.when i connect sata and any of the disks, works well
3.when i connect all the three of them starts the clicking/sound/ ))
3a.that does not happen always, there have been days when i could connect them all and they worked just as new.,
so i really do not understand..
..so please does anyone have any ideas.,?

6 replies

by thumbsup2

Sounds like your power supply is not adequate to spin all of them up to speed at the same time. Try replacing it with a more powerful (bigger) power supply.

Or, an option might be to purchase a powered external caddy. That could supply the power needed for one of the drives.

As for why it works with all 3 sometimes and not others, suspect the power in the building is experiencing a 'brown out'. Not enough power at certain times.

by adam_klimovic

well, thanks for reply.,
i dont know.,i have 400W power supply.,is not that enough.,.,?
thanks again

btw: now it works just well. all three of them.,

have no clue...

by oh smeg

Several PS's are not rated fro a constant Power output just a Peek Value. So if the unit is already Hot or the Input Voltage is not quite right they can be on the low side or maybe even breaking down and not producing the correct current if the actual Voltages are right.

What you need here is a PS Rated to a Constant draw not a Peek Draw so look at PS's like the Antec Brand where one rated to 350 W is the equivalent of a 500 or greater one rated to a Peek Value.

Col

by hjs

I am running 2 SATA HD's, 2 IDE HD's and 2 IDE CD/DVD drives with an Antec 450W PS and all run just fine.

by oh smeg

With a Antec 450 W PS and there are no problems at all.

Even in the basic Workstation which has 2 X SATA Drives, 2 X IDE Optical Drives and 1 X IDE Boot Drive there are no problems with a 350 W Antec PS.

If the drives are making a clicking sound it has to be the PS not producing enough current to run the drives here.

Col

This discussion is closed to new replies.