Question Locked

SATA drive on 3rd SATA port not showing in BIOS

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a MSI board that sees 2 of my 3 SATA drives. The drives are fine in the 1st and 2nd SATA port, but when I plug my 3rd drive into either the 3rd or 4th port the drive is not showing up in the BIOS. Any ideas

6 replies

by beelzebub1566

Bro, I also faced the same kinda proble but I'm not getting a link from where I can raise my own question.. so it'd b of gr8 help if u cound pls guide me to it..

by older mycroft

THAT is how you start your own question.

As regards your problem, have you tried a new SATA cable - they do fail occasionally. :)

by peconet tietokoneet

If you update your BIOS it just might correct your issue.
Go to your motherboards web site and read on how to update the BIOS.

by mhofu

Have you switched the drives around? Have you checked to see if the drive you want to put in is functional? intherchange the cables see if it helps. If not, it could be the BIOS that needs an update. Let us know the outcome.

by ugadata

After verifying the cable and that the drive is actually good and before you upgrade the BIOS you may want to take a look at the BIOS settings for the SATA and PATA controllers.

Some motherboards will try to share the resources for PATA and SATA controllers (or make the SATA controller look like a PATA drive).

This discussion is closed to new replies.