Question Locked

SAV Rtvscan CPU spike in VMware environment

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
We are having issues with SAV 10.1.5 on our servers that's running in our VMware environment. We are running ESX 2.5.3 and we are running schedule scan not real-time scan and we seeing spikes between 3-15%. We have a temporary solution but need a permanent fix - disabled tamper protection, disabled start-up scan and removed files left in the lvdp folder then restart services and it goes down to 0% but a couple of days later it goes back up. As anyone exprience this kind of problem and how did you fix it?

2 replies

by bill_sedgwick

We found that leaving email tools in SAV 9.x caused a problem with many of our servers, both physical and virtual. Removing it has helped tremendously. Some servers were even shutting down because of problems traced to this. To update, go to add/remove programs and choose change on SAV. (On install, choose custom and set it to not install the email tools.) In the 9.x version if you updated an existing version of SAV, you also had to manually remove the SYMTDI and SYMREDRV services from HKLM\SYSTEM\CurrentControlSet\Services, but only if that's your only Symantec product installed. I do not have version 10.0 so I can't tell you if that's still a problem.

Additionally, scheduling AV scans on VMWare virtual machines to different times can help reduce overall CPU and disk usage.

Don't forget to patch your VMWare host with the Daylight Savings time patch. (Patch 5 in 2.5.3, I believe, or Patch 3 in 2.5.4)

This discussion is closed to new replies.