Question Locked

SBS 2003 use up to 4 fax modems (fax spooling)

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Never seemed to be able to install more than one modem!

Any of you AVTUALLY been able to install more than 1 fax modem on SBS 2003?

Or shall i just install virtual server?
"VMware"?

4 replies

by cwallace

I have a rocket card that is made for installing up to 8 modems on 1 computer. The modems have to be controller based.

by cg it

If you plan on using the shared fax service of SBS, your limited to 1 line modem. The shared service doesn't see any of the other lines. not sure why this is and MS doesn't think it's a big deal. From what I understand, with the new SBS that replaces W2003 they are considering getting rid of shared fax service all together.

With SBS 2000 you could use the multi line cards but with W2003 for whatever reason, the shared fax service doesn't like the multi line modems. RRAS seems to not operate well with the multi line modem cards either.

haven't tried uninstalling the shared fax service and then using a multi line modem but it's an idea to try.

by ray

I have a Dell PowerEdge 2650 with 4 modems installed but only 3 show. They are:

US Robotics External 56k
1x Broadcom v.92 Modem (PCI)
2x Conexant D850 56k modems (PCI)

All equipment was sold to me by Dell.

I am running SBS 2003 Standard, but I was running SBS 2000 until last week with the same first two modems (USR & Broadcom) without any issue. Today i added the 2 Conexant modem cards but only one of them shows in MS Fax Service Manager and Device Manager. I think it might have something to do with the above post regarding multi-line modem cards. My theory is that as long as they are all displaying different device names (maybe even as simple as different model numbers) the devices will work fine. However when you have 2 devices of the same name only the first loaded one will function.

Networking and Sharing compensates for this with NIC cards by numbering them. I.e.
Intel ProSet 10/100
Intel ProSet 10/100 #2 and so on...

Unfortunately I don't think the fax manager has such a method. I'm glad I figured this out with cheaper single line cards than after purchasing one of the more expensive multi-line cards.

Again, this is just theory based on what is working for me. If anyone has any different information to confirm or deny this please post. Tomorrow I'm going to try to replace the second Conexant modem card with one of a different brand. I'll try to post my results when I have them.

This discussion is closed to new replies.