Discussion Locked

Scandisk Would Not Autorun

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Even though Disable Scandisk After Bad Shutdown is unchecked my computer won't run scandisk even after a bad shutdown. By bad shutdown I mean my computer locks and does not response even after some time.

8 replies

by dmiles

The feature may be disabled in the Msdos.sys file in root directory
Open the Msdos.sys file in a text editor
Check the Options section,should read
AutoScan=2
;Enables scandisk to run automatically if
;a shutdown error is found
;0= disabled
;1=Prompt
;2=No Prompt
;The default is 1
Then check Msconfig from the Run box to make sure that the box is checked to run scandisk

by rajeev418

Even after changing the values in the MSDOS.SYS file my scandisk would not run automatically. In the msconfig it is written "Disable Scandisk after bad shutdown". The option is not checked.

by dmiles

Use a startup disk to reinstall the files from acommand prompt,use a disk that had all system files on it.
Insert disk and boot computer and choose to install without cd-rom support,after process reboot comuter and see if this will clear up problem

by rajeev418

It would have been better if you would kindly mention the task in detail, i.e. the Files which I should make sure there is in the boot up floppy.
Thankx

by the computer know-it-all

first off start your computer. then, if you
can get into windows, click on start. Go to
programs, then accessories,then system tools.
click on scandisk. before you start scandisk
hit the (ctrl+alt+del) keys & close
everything except systray andexplorer. make
sure that all virus scanners and firewalls
are off the list, also disable them on the
tool bar. to do that right click on the icon
and click disable

good luck
R.F. Bolha

This discussion is closed to new replies.