The LVD/SE SCSI interface is NOT the same as fibre channel by any means. The LVD interface is a method to connect compatible 68 pin SCSI devices with less restrictions on cabling.
Here is a quote:
"LVD/SE stands for "Multimode Low Voltage Differential and Single Ended". Most LVD devices support LVD/SE. The term multimode is very tricky though, because it makes you think that devices can run in LVD and SE mode at the same time. This is not the case, a LVD/SE drive must run in LVD or SE mode."
from this web site:
http://www.scsicablesource.com/lvdfaq.html
Here is another site with detailed information.
http://www.storagesearch.com/lvdart.html
Here is some more on Fibre-Channel:
"Fibre-Channel is an interface standard for connecting computers to mass storage devices such as disk drives, disk arrays and tape libraries. Developed more than a decade after SCSI, which it was intended to replace for high performance applications, the Fibre-Channel standard was specified around faster data throughput speeds, and longer distances because of its use of fiber-optic cable. Data reliability was also significantly better than parallel SCSI because data errors due to crosstalk and line reflections were effectively designed out.
The differences in spelling (Fibre in this standard versus Fiber in the cable) were done deliberately by the standard creators.
In recent years, new versions of SCSI, such as iSCSI have nearly caught up in speed terms (and iSCSI over InfiniBand is even faster) so the original performance differences are now blurred."
Here is a web site dedicated to Fibre-Channel.
http://www.fibrechannel.org/
Chas