2 replies
by joe Accepted solution
by oh smeg Accepted solution
But first you have to realize that External HDD are not for Full Time Use they get way too hot and suffer from Vibration Damage when mounted in External Enclosures.
Now for the problem at hand if the drive has been left running for long periods of time it has got very hot and heated up all of the Electronics in the Enclosure. At this point you need to test the HDD with Seatools available here to download
You need to download this Application and test the HDD with it. Then if it fails remove the HDD from the Enclosure fir it to a computer with a SATA Interface and test again. If the drive still fails it has gone to Silicon Heaven and if you really need the data off it you need to send it to a Data Recovery House to have the Data Recovered. This isn't at all cheap by the way either so be prepared for a large expense up to 60 K or more depending on how fast and how much work is required to recover the Data.
If the Drive now works in the computer the Electronics in the External Enclosure have died and you need to replace the External Enclosure. If the drive reports being overheated you can still use it but do not rely on it for Long Term Storage.
When you replace the HDD in the Enclosure you need to use both USB Plugs on the Lead at the Computer end in different USB Ports on the Computer or in a Powered USB Hub. The USB Ports only have a very small current available and the more of a load you place on them the less current is available to run a HDD. Even if you actually have an external Power Pack for the Enclosure you still need to plug in Both USB Plugs into different USB Ports. This is where the Stable 5 V DC that the HDD needs to run reliably comes from and if this is below the needs of the HDD it will not work correctly.
You also need to use the Safely Remove Option when you disconnect any USB Device or you run the risk of the Partition Information on the Drive being destroyed. If this is what has happened here again it all depends on how important the Data is if it's Vital send the Drive away to a Data Recovery House and allow them to Rebuild the Partition Tables. You should get all of your Data Back if the drive is working correctly.
If it would only be [b]Nice[/b] to get the Data Back you can use one of the many Data Recovery Applications available. There are many different ones and here is a short list of the more commonly used ones
While the last 2 are from the same company they are very different products. Win Hex should only be considered for use by someone who knows Hex Inside Out while Davory is a great cheap General Purpose Application.
Personally I prefer the On Track Option but it's anything but cheap. However because I use this type of software a lot it's paid for itself many times over by now, for a cheaper option Spin Rite from Gibson Research or Stella have both very good reputations by other TR members.
Col
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending