Discussion Locked

Second HD, drive letters are a "no show"

0 helpful
19 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I bought a 2nd, larger HD for the purpose of transferring the info from the 1st, smaller HD to it. The 1st HD is partitioned via Partition Magic. I partitioned the 2nd HD, which PM staff said was done correctly. However, only 1 drive letter shows upin Explorer for the 2nd HD. The support tech didn't know the solution. How do I get the others to show up? What are the sequential steps follow to install Windows on the 2nd HD, changing the jumpers, etc.?

19 replies

by espet

A few questions for you. You said that you partitioned the HD. Did you create a drive in that free space now? It would be an extended drive with a logical drive. If this was done, then the drive would show in Windows. Second question, what version of Windows are you running?

by geek2d

take drive 1 and make sure it is at the end of the IDE cable and set the jumper to Master. Take drive 2 and put it in the Middle IDE Cable connection and set its jumper to slave. As always, make sure you have the latest BIOS for your PC. Boot up andcheck to see if they both show in the BIOS properly. Go into PM and make sure both are Primary partitions and they are fat32 or NTFS if NT or 2K. If that doesn't work switch both HD jumpers to cable select. Let me know if it is still a problem.

by @lberto

I need some more information,
What kind of PC do you have, did your BIOS detected both hard disks at the same time?, did you run PM from this pc or you used another one?
What OS are you using?

by zlitocook

Why not use ghost? if you connect both hard drives to the same cable and boot to the ghost floppy it will give you a gui with both drives and you can copy drives drag and drop or just move files from one to the other.

by brifd1

Answers to your questions: I believe that I
created a drive in the free space. It shows
as having a primary partition and a logical
one; the latter has 4 parts. Only the
primary partition shows in Explorer. I'm
using Win '98SE. I don't understand the Q
about the BIOS detecting more. I ran PM
from this PC. Great idea re: Ghost.

by markust

Another solution besides Ghost is the
program you allready used, PartitionMagic.

It has the partition copying function as well
and it works fine when just copying os to
another hd to be used as the primary hd
for that computer.

The new hd has to have as much free space as the os-partitions size is before copying. It has to be also at the beggining of the hd, since it's the os is w98.

Markus

by brifd1

This didn't work. Perhaps I need to change the new HD to be the primary one or upgrade the OS (the latter gives me shudders!).

by brifd1

I believe that the person who suggested
using PM to copy a partition found the
answer, perhaps unintentionally (I chose
"primary" and "unhide" for the new HD's
partition)? I attempted to do this for the
"primary" partition and got this "Warning":
"OS/2 and Windows 95/98 do not support
multiple visible primary partitions. If you
unhide the partition and then boot OS/2 or
WIndows 95/98/Me, data loss can occur."
I did not choose to "Continue with
unhide?"

by shuja52

Hi
see your config.sys setting> enter a new line
lastdrive = Z and see the result

by destroyer

What you maybe can try is use FDISK with large support enabled and create one partition on the whole drive.

I yu really want to use more than one partition on the drive, when creating partitions with FDISK, the second is usually partition is an extended dos partition. Make sure that you also run option 3 which is to create logical drives in the second partition, otherwise you won't be able to access the 2nd partitions drive letters.

This discussion is closed to new replies.