Question Locked

Server 2003 Setup Disk

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have made my own server 2003 setup disk but can't make it boot for system startup. I have been told you have to make the cd bootable first then put the installation files onto it. Could anyone help me in telling me how to do this please. I can't find any info on making a bootable cd.

2 replies

by Former member

I have put posted some examples here for you.
I hope this helps you.

First Of All You Need A Cd-Burner, Nero Burning Rom v5.5 or higher
A Floppie Drive, A Blank CDR Disk
When You Have Everything:

With Your Floppy In The Drive And Blank CD In The CD-Recorder

* Load Up Nero With Your Floppy In The Drive And Blank Cd In The Cd-Recorder
* Close The Wizard
* Hold Ctrl + N
* Until A Box Appears
* Scroll Down The List Until You Reach CDROM (Boot)
* Click It
* Bootable Logical Drive Must Be A":"
* Click The Burn TAB
* Click New
* Click File
* Then Write CD
* Then Write
* Done

Nero is available here. Sure there are other applications that do it but Nero seems to have an edge up on drive compatibility.

Another Easy Way To Turn All Of Your Bootable Floppies Into Bootable CD's

You Need A CD-Burner, Roxio Easy CD Creator, A Floppie Drive,
A Blank CD-R Disk After You Have Gathered Everything Together:

* Put the blank CD in your drive
* Place your bootable floppy diskette in drive A
* Start Easy CD Creator
* Select "File", "New CD Project", "Bootable CD"
* Select the bootable CD type
* Then Select OK

Enjoy your new bootable CD!

(This was written with reference to version 5.01 S30 of the software in Windows.)

And Here's Another Way For You To Make Bootable CD's

To Create A Bootable CD, You Need A CD-Burner, Roxio Easy CD Creator, A Blank CD-R Disk And The Bootable Source Media. (The source can be a floppy diskette, a hard drive or a previously created image file of any of these. Use "Help" if confused at step four below.)

After You Have Gathered Everything Together:

1. Put the blank CD in your drive
2. Start Easy CD Creator
3. Select "File", "New CD Project", "Bootable CD"
4. Select the bootable CD type
5. Then Select "OK"

Enjoy your new bootable CD!

Here's the Method To Create A Bootable CD From An ISO Image File

(You need the same resources as above)

1. Put the blank CD in your drive,
2. Start Easy CD Creator
3. Select "File", "Record CD from CD Image...."
4. From the browse window that comes up, select the type of file
5. Then browse for the image file
6. When found, select it
7. Select "Open"
8. Answer any dialog boxes that may appear
9. Select "Start Recording"

Enjoy your new bootable CD!

(These were all written with reference to version 5.01 S30 of the software under Windows.)

Thanks to Michael Kitchen of Front Row Computer for above.

This discussion is closed to new replies.