Question Locked

Server can't ping external network

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

SBS 2003 Server connected to switch along with firewall. DNS configured on server and firewall.

The workstations can connect out to the internet just fine using a static DNS address. When configured with a local DNS, with the server's Forwarding set as the external DNS, URLs are not resolved, and the process fails.

The server cannot ping URLs or IP addresses. Both NICs in the server function in the same way. Anyone have any idea as to what could be wrong?

2 replies

by sgt_shultz

see if you have an asterisk in the list of root hints. if you do, remove it. I take it from your post you have configured a forwarder so you probably already have the asterisk removed. this could be lots of things so if i were you i'd look up 'no internet' at support.microsoft.com. firewall most likely culprit imh experience. maybe you could turn all off as a test. plus sbs has iis installed by default so maybe the proxy settings come into play. this is a common problem and they will have a step by step troubleshooting doc for small business server (use that one) that should get you fixed up pretty quick.

This discussion is closed to new replies.