Question Locked

Server connection problems

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hey

ok have had this setup working properly since first install, now i finially get terminal services working and something else breaks *sigh*

ok so on my DC running SBS2003 cant see or access my TS which is running Standard 2003. under ms windows network in network places there is only the dc under the domain. on the TS i can access the servers shares by using \\, i can access the companyweb but under the ms windows network in network places i cant see anything under the domain neither server can be seen.

4 replies

by churdoo

The problem has to be DNS. Does your SBS list itself as the first DNS (I'm thinking this answer is yes), and does the Term Server list the SBS as its first DNS (I'm thinking this answer is no)?

by astro

both server primary dns server are set to the SBS. the TS though does have a 2nd NIC to allow remote TS access and this is set to the settings from my ISP

by churdoo

You still want the DNS settings of your public NIC to point to the SBS. You want the IP, Subnet Mask, and default Gateway to be set per your ISP, but the DNS should still reflect the SBS (the SBS should be set with your ISP DNS resolvers in its FORWARDERS tab). Further, you MAY want to go into the advanced props of the public NIC on the DNS tab and UNCHECK regarding registering the connection to DNS (to avoid the possibility of an internal object being mistakenly directed to the public NIC).

My sense is the the public NIC on the TS has a higher proiority than the private NIC, which you can confirm in Network Props / Advanced / Advanced Settings and therefore those incorrect DNS settings are taking precedence in the registration. You would also see evidence of this in the Event Viewer with some errors about DNS registration.

This discussion is closed to new replies.