Question Locked

Server2000 not 'browsable' on network

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a home network with 1 XP, 1 Server 2000 and 1 Vista machine on it. It seems I can not browse to my 2000 computer. Here is a list of what I can and can not do:

*Ping 2000 from XP & Vista: Yes
*Browse 2000 on Network from XP & Vista: No
*Run \\<2000-ip-addy>\ from XP & Vista: Yes
but does not see any shares (all shared)
*Ping XP & Vista from 2000: Yes
*Run \\\: Not found
*On my router the 2000 machine (static IP) address does not show on my Clients table. Should it show up or not?

7 replies

by wayne

I have the same problem. How did you resolve your issues? Any help will be appreciated.

by kellyrmcp

I have the same problem, with Win2k Pro. I need to network these PCs. Why is it so hard to find the info? Microsoft should have it posted somewhere, as so many people still use Win2000. Did you find a solution? I assume an action is required in Vista.

by mlee

Do you have it setup as a Domain or workgroup? I would create the domain and join the workstations to the domain or just make sure they are both in the same workgroup. Also in the network settings make sure to enable netbios over Tcp/Ip (if your not using a local dns) that's under the wins tab.

by kellyrmcp

I am working under a workgroup, and Netbios over TCP/IP is enabled. It's got to be something with Vista. I've opened all the ports listed in the bottom 2 sections of this page http://www.microsoft.com/technet/network/evaluate/vista_fp.mspx. I have McAfee Security Center, but even when I turn the firewall off, I can't browse to the 2000 Pro box. I can ping between both machines. As a side note, I can successfully network between 2 Win2kPro PCs.

by thumbsup2

Can you take the Vista machine out of the group (unplug cable) and try it from XP. If successful, take the XP machine out of the group and put the Vista machine back in, then try it. That will narrow the search to which machine is causing the problem.

Let us know what you find.

by 45geek

you are probably going to find the problem with vista...it has a tendacy to take over if it can....you might have to get into the network connections of vista and make sure that it is seeing itself as a host and not an admin for the network...and make sure that when doing ipconfig on all the machines they are all in the same network...or they won't talk with each other...you can always make sure that the subnet mask for all machines is set to 255.255.255.0...that should give you all hosts and they should all be able to talk to each other P2P mode....you haven't said if you have run a netstat inquiry or diagnostics of the network either that will tell you alot about what is going on and weather or not they all see each other....have fun.

This discussion is closed to new replies.