Discussion Locked

Setting up 4 port server nic

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I can not sort this one out.
Single server network. W2K server installed using the onboard nic. I have now got a 4 port server nic and wish to use this to serve three diffrent computer suites in our school. After installing and setting up an array, I am unable to access two of the suites. Connecting the onboard nic to the main switch and all is well, of course.

Any help would be most welcome.

Thanks. Peter

3 replies

by mckaytech

How is your addressing scheme set up? Is each suite a different subnet?

If all the NICs are okay and up and functioning, my guess would be that you need to define static routes to the other two suites.

Also, if you're going directly to the server from a patch panel, you might need a crossover cable instead, particularly if you don't have link lights.

Other things you can try are going to a command prompt and do an 'ipconfig /all' and make sure all the addresses, subnet masks and gateways are correct. After that, do a 'route print' and see if there is a route to every subnet. If not, you'll need to add them.

A route statement will look like this:
route -p add 131.107.3.0 mask 255.255.255.0 131.107.3.1

Hope that getsyou started.

paul

This discussion is closed to new replies.