Discussion Locked

Setup NT trust relationship

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
We have a tunnel set up between main office and CA office. Both server can ping each other. I tried to setup 2-way trust between two domains but no luck. First, I got error "can not locate domain controller" and then according to Microsoft notes,I changed some registry setting on both server. Now I got error "password is incorrect" when I tried to set up the trusted domain. I tried both domain's administrator password. Please help!

5 replies

by green lantern

Don't k now what you have tried but this has worked in the past:

Remove the trust data you currently have on the two domains. Add the distant domain's PDC in the LMHOSTS file on the local PDC. Working on the local PDC, ping the distant domain'sPDC using its name not its IP address. Once you can do this then open User Manager for Domains and setup your trust. DO NOT use the administrator password from either domain. It is not required.
Under policies/trust relationships go to the trusting box first. Remember the password you use. Give the system a minute or two to acknowledge the setting then have the distant domain establish a TRUSTED domain. When prompted for the password enter the password above. The hardest part is establishing NetBIOS name resolution USer Manager requires this for your setup.
ralph

by scortes

You may want to setup a WINS database on each server and setup WINS in each servers network control panel. Then set each WINS database to be push/pull partners of each other. THis will allow you to resolve each domain name across the WAN.

This discussion is closed to new replies.