Discussion Locked

Share printer doesn,t work properly in windows Domain Solution?

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi,

We have one Windows 2003 server domain setup in that some 25 users are there. We have four shared printers(printer is connected to the users pc) in the network.All users are used to take a printout from the shared printers.

But many time we are facing printing problem, like printer is not ready, or printer is not accessible even printer is on and idle. If we refresh the printer 7/8 time then some time it becomes ready some time not. So we used to log off or restart the pc then the printer becomes ready. This is very painful job, every time doing all this thing is not acceptable from customers side.

Please let me know how to resolve this issue, any suggestion will be greatly apprecited.

Regards
Harish

2 replies

by jinteik

Hello ...

ok im not the expert but i will try to help you out..

1. Whats the ram in the pc?the minimum needed is at least 512mb of ram (don't care ddr,ddr2 or etc) or if you have more budget to splash then it will be better.the.Usually if there is lack of ram then this thing might happen. happen.worst is if there are background applications running together with the printer.on more question is wat OS are u running for the pc that you connect ur printer?

2. Usually if you have printer has this type of problems, try restarting the printspooler and tcp/ip printer stuff (not sure which 1,will get back to you tmr)..that should work.

3.if it does not work, restart both the pc and printer.

by johnhong

If it is a USB printer, go to the device manager and make sure that there is no check mark indicating that the USB Root Hub can be turned off to conserve power.

This discussion is closed to new replies.