IT Employment

Ask something
Discussion Locked

Simple network problem

0 helpful
5 replies

by bjorn

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi.

I'm a sort of a newbie in a new job, and I've got a little problem. We have a small office network with three machines. Two are running XP, and I'm running w2k. All machines are directly connected to a router, and on the net. Our LAN, though is not ok. I'm machine 1 and can connect and ping machine 2, but not machine 3. Machine 2 can connect with 1 & 2, machine 3 can connect to 2, but not to one. This happened more or less overnight. It worked properly a few days ago. The error is "can'tfind network path". What is wrong?

All the best -> Bjorn

5 replies

by nandan_gijare

Hi Bjorn,

I think that it might be a problem of your subnet mask problem. can you tell me what is the subnet mask you are using on all three machines? Are they connected to different ethernet ports of the router? Can you give me the IP addresses of various interfaces of the router also? I guess i can help you to solve this problem.

Regards
Nandan

by bjorn

Hi.

Subnet mask: 255.255.255.0
The three computers are now connected to a switch, and the switch is connected to the router. The router's ip is 192.168.123.254 and we all have that as default gateway.

I really appreciate your help!

Best regards -> Bjorn

by bjorn

Hi Nandan.

Now it seems even more weird... The only problem now is that I cannot find computer three. When trying to access him , I get an error stating"\\Ernst is not accessible-Network path not found". I cannot ping him either, but he can ping me...

Best regards, Bjorn.

by dbesenho

is it token-ring or ethernet?

i'm not an expert in this, but from description, almost sounds like it's on a bus topology, or token-passing. if you picture a circle, 1 connects to 2, 2 connects to 1 or 2, 3 goes to 2, but doesn't complete the circle to 1. since there are only 3 computers, it would be easy to try replacing the network cable or the nic on each of the computers (try starting with computer #3) and see if this helps.

just something to try . . .

by chrisms

Asuming that you are using one hub, I would considr changing that first, as looking at the connections, it almost looks like a hub connectivity issue. I would guess that the port that PC3 is plugged into is mis-functioning.
Swap the Cables around in the hub ports and see where the connections work then.
If you need more help, I'll be glad to provide.
Hope U solve it.
:-)
Chris

This discussion is closed to new replies.