Discussion Locked

Small Network Win2000 - Problem with one

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

My computer (Win 2000 Pro) is the primary one in my home network with three other computers (2 Win 2000, other Win 95) operating on a TCP/IP network. Suddenly my computer can not see the drives in one of the Win2000 computers and that computer can not see the drives in my computer. But communication to and from the other two computers operates as before. Have tried a new cable from the hub to the problem computer - no change.

I tried removing and then replacing the Drive Mapping in both computers. Strangely both computers allowed me to map the drives in the other but when trying to access a folder in a drive on the other computer the drive and its directory structure shows but when double click on a file get the drive not available message.

Attempt to access directory on the other computer - Explorer shows the drive and directory structure but when attempt to open a file Explorer appears to lock up for a long period and eventually gives a message saying the remote file is notavailable.

However my Secretary has no trouble using the Internet through Internet Sharing with the modem on my computer and she is able to print using the printer on my computer.

When I try to contact the Secretary computer the Event Viewer in my computer produces the following error messages - multiple times -

Event Viewer Properties -

Source DCOM
Error Event ID 10005

DCOM got error "The service did not respond to the start or control request in a timely fashion. " attempting to start the service netman with arguments "" in order to run the server:
{BA126AD1-2166-11D1-B1D0-00805FC1270E}

Source Service Control Manager
Error Event ID 7000

The Network Connections service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.

Source Service Control Manager
Error Event ID 7011

Timeout (30000 milliseconds) waiting for a

4 replies

by djent

If you do not nave SP2 installed do so. Otherwise remove networking and reinstall it, try a different NIC.

by Member 33671932

Thank you very much for your help. I do have SP2 installed and did try removing networking and re-installing it - looked like it worked for a dya then became very flaky.

Sorry I do not understand what you mean by "try a different NIC?" Please explain more.

I have now also tried the LMHOSTS suggestion which has fixed one computer but not the other!

I do appreciate your help.

Noel

by ghstinshll

look on all three computers for a file called LMHOSTS. Open it with notepad and put in entries for all three of your computers...

COMPUTERNAME IPADDRESS
COMPUTERNAME IPADDRESS
COMPUTERNAME IPADDRESS

Do this with all three computer names andtheir appropriate IP address that's assigned to each computer. You should be using static (manually assigned) IP addresses...

by Member 33671932

Thank you very much for that piece of advice. I found files called LMHOSTS.SAM in the WinNT/System32/drivers/etc directory in both computers and renamed it LMHOSTS.TXT (to keep the info in it) then deleted everything in LMHOSTS.SAM and replaced it with four lines each
IPADDEESS COMPUTERNAME

I have four computers in the network and the text in the file said that was the correct order. I did the same in all four computers once I found it looked like working.

Now my computer can access files in my Secretary's computer with no difficulty. But she can not access my computer! It is quite weird as the directory tree in each drive comes up immediately and she can open any directory - but when she double clicks a file she gets the old Drive not available message.

Have I done something wrong? Or is there more work to do?

Best wishes,

Noel

This discussion is closed to new replies.