Windows Forum
I have this error message every time the NT server is being boot-up. This error message will pop out at the Logon Screen.
" The procedure entry point SnmpSvcGetEnterprise0ID could not be located in the dynamic link library snmpapi.dll"
Any idea why and how to solve this problem?
by jeff_graves
If this is on a Compaq server, you have either recently applied a SP, the SSDs, or the Insight Agents in the incorrect order; or you have disabled SNMP service without disabling the Insight Agent services as well.
The correct order for a system upgrade on a Compaq server should be ROMPAQs, reboot, SP, SSD, reboot, Insight Agents, then a final reboot. Compaq recommends that you not reboot between applying SP and SSDs. Also SSDs should only be applied after the SP. Microsoft does not support this method, however the SP frequently overwrites necessary dlls for the SSD and Insight Agents to work properly.
Hope this helps.
by soekratis
by slora
The SNMP service was installed after the service pack. Its files need to be updated by reapplying your current service pack.
See http://support.microsoft.com/support/kb/articles/Q163/5/95.asp
If reapplying the service pack fails to resolve the problem, try manually substituting the snmpapi.dll by following the procedures in http://support.microsoft.com/support/kb/articles/Q192/5/28.ASP
by soekratis
by soekratis
This discussion is closed to new replies.
Sort by Trending