19 replies
by bbpro991 Accepted solution
by raharr Accepted solution
Check your device manager on your laptop and see if it has a "?" mark by it. If it does, try removing it and letting it find it again. The orginal drive should still be on your laptop.
If I remember correctly, HP use to have a disk partition that could rebuild your computer back to the way it was when you got it.
Also, try system retore and restore from the day before it started messing up.
I would check the card first. Then restore from a earlier day before doing a system rebuild. That would be the final measure when all else fails.
Under device manage, it should list what kind of wireless card you have.
Take a look and let me know. You can email me directly if you want at either of the following.
redravensc@gmail.com
or
raharr@scdjj.net
Russ
by absolutely Accepted solution
by bbpro991 Accepted solution
by baxenden Accepted solution
If Ipconfig /all shows the wireless adaptor then it's likely its installed (it will always show disconnected unless it's received an IP from the router).
Go into device manager >> network adapters and right click on your wireless card selecting uninstall. Reboot your machine and you should find that Windows locates your wireless adapter and should reinstall it - if you need the drivers you can download it from HP's website (they have a utility which automatically detects the model of system you have).
If that still doesn't resolve your issue, try setting a static IP address on your laptop in case DHCP isn't working on your router.
by bbpro991 Accepted solution
by tintoman Accepted solution
Of the wireless adapter being switched off
Before you do ANYTHING else, check that you didn't accidently switch it of by pressing Fn and F7 or whatever your key compbination is, also there is likely to be a tiny switch on the front or side edge of the computer which cuts the power to the wireless adapter
by robo_dev Accepted solution
on my HP there's a little square button on the side that shuts off the wireless adapter.
Like when my co-worker complained that the auto repair shop wanted $400 to fix her power trunk release. I looked at the car and switched the 'power trunk disable switch' (in the glove box) from the off to on position. Ungrateful person didn't even buy me lunch....
by bbpro991 Accepted solution
by robo_dev Accepted solution
The exact model number will give info about the WLAN hardware that's included.
The WLAN hardware may be 'built-in' but it's still a replaceable module.
Does the WLAN adapter show up in Bios setup?
I would want to run hardware diagnostics and would suspect a hardware failure, or maybe the module needs to be re-seated.
by bbpro991 Accepted solution
by the scummy one Accepted solution
notebook with a serial # and product #.
Since it is an HP notebook, it likely also says (below the LCD) Pavilion xxxx (where the x's are #'s)
by the scummy one Accepted solution
if you press the button, you may need to wait a few seconds
before it does anything.
by the scummy one Accepted solution
by bbpro991 Accepted solution
by the scummy one Accepted solution
it should show (even if the card is removed completely) "Wireless Networks".
If there is a red x in it, right click on it, and see if it says enable or disable.
If it says enable, that is why your button is not working, because the adapter has been disabled.
Looking in device manager, if the device has failed, it may not show up. This would also happen if the button is set to turn off the card.
by bbpro991 Accepted solution
the serial is CNF6401MWF
product is RG264UA#ABA
by the scummy one Accepted solution
http://search.hp.com/query.html?lang=en&submit.x=6&submit.y=1&qt=RG264UA%23ABA+&la=en&cc=us
and this link states that if the wireless adapter fails to find a network, to update the BIOS for this unit
by bbpro991 Accepted solution
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending