Discussion Locked

SP2 update causes stop error 0x0000007f

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am trying to update a Dell Optiplex GX260 to SP2. Everything installs fine withoug incident until it reboots. I receive the blue screen stop error code 0x0000007F (0x0000000D, 0x00000000, 0x00000000, 0x00000000). Microsoft is no help. When I was on tech support with them, I was told they couldn't figure it out and would escalate it to tier level 2. Well it's been a week and still have not heard back.

Things I've tried are:
Booting in SafeMode and installing;
Turning off all startup items in MSCONFIG;
Removed all adbots and viruses (first thing I did).

Can't figure out why this unit will not take SP2. This unit belongs to a professor and has important info and software on it so as a last resort would I consider reformatting, but I don't want to take the chance of doing that if this is going to happen again. Anyone run into this issue?

5 replies

by sgt_shultz

my two cents is i would get help from dell not ms on this one.
searching the mskb at support.microsoft.com and skimmning the results i am lead to believe you either have problem with anti-virus and need registry hack, or you have failing ram, motherboard or an overclocked processor. there is more but you didn't give much to go one so you must go and search yourself and filter with your knowledge of situation
now, many many ways to joy on this.
if you archived your old stuff during sp2 install, try to uninstall using Recovery Console and the hidden installation folder created during the archiving. see mskb 'how to uninstall xp sp2'
if not, you will need a 'rescue' installation of xp on the box either on a drive with enuf room (say 4gn) or put a drive in. once you have that you can edit registry to fix. or leave it booting to new install. if previous install has stuff in the user profiles, on the desktop or in my documents you need to find it and copy it off somewhere before clobbering the current os installation.
if this is greek to you then i say that is your question for ms: how to perform parallel installation of xp. your question for dell is: ms says (to stretch it slightly) that this error post xp sp2 indicates hardware. how can you help me test my hardware?

by sgt_shultz

oops. just reread your post. you are lucky you can still boot. see if registry editor works and control panel add remove programs. if that works you can uninstall xp2 there. and research the anti-virus software you use see if you need to update it for xp sp2 or something. you may not need a parallel installtion

by amaronge

I should have stated earlier that I also ran hardware diagnostics and everything checked out fine. Also checked BIOS updates as well. All is fine. Also tried the Recovery Console and replacing two files from the backup which were ole32.dll and msvcrt.dll.

by adastramedia

Good Lord, so many times I tried to install the SP2 on my Dell Dimension 4500.

My problem was always the Bluescreen Horror after rebooting and I spent all these hours restoring to SP1!!!

Problem for me was that I had partitioned the C-drive (having multiple XP-installations) and after reboot the booting did not find the system. I really tried all options, using Norton System Works Premier boot-CD and XP recovery console. But everything failed. And, cursing Dell for not supporting the problem (other then a link to Microsoft on how to restore to SP1), I thougt I had to buy myself a new computer.

Until I the other day found the soloution using the XP Recovery Consol.

The crucial issue was that I had to change the booting path using bootcfg command. This command scans the drive for XP istallations and lets you add and bootable installations.

I had to do this on both partitions seperately and after doing that I can now easyly switch between my two XP installations.

TIP : A very useful thing to do before you do the SP2 install, is to install the Recovery Console on you C-drive On restarting / rebooting you then get the option to boot into the recovery console on the hard disk and it will load very much faster from there than from a cd-drive.

The bootcfg command "add" solved my problem. After some trial and error I messed up the boot-ini file and had to cleans it using the boot.ini edit function described in the bottom part oft the page here : http://vlaurie.com/computers2/Articles/bootini.htm

Well, I just wish that Dell would have figured this out for me .... It would have saved me so many hours failing to install the Windows XP SP2.

/fred

This discussion is closed to new replies.