Discussion Locked

Specify Drive Letter Assignments

0 helpful
10 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Is there a way to specify the drive letter assigned to each partition on IDE drives in Win98se? I know that normally the answer is no, but was wondering if there is a way around the system assigning letters. I want to set up a stand-a-lone win98 machine to look like our network machines. This would enable me to run scripts that are drive letter specific and use config files from the office network on remote non-network sites directly. Thanks

10 replies

by mphoffar

I don't beleive there's a way to specify it with something like fdisk or even partiion magic. However, I think you can setup file and print sharing on the PC and then hit the share name as you would with a network drive...even though you're not going through a network, just accessing the drives a different way

From there, you would just map your drives the same way you would on the network.

Mark

by dmiles

No you will not be able to do it in windows,there is a dos command assign that will redirect the disk drive request to a different drive,it is a DOS 6 version stored on the dos supplemental disk,or use search to locate DOS COMMAND ASSIGN,to take a look.

by kgosnell

You can assign drive letters to a folder ,Which would likely be superior in your case, but read your documentation Help files for a network , it should tell you how to resolve it, I have the exact setup for the folder remake , but it is archieved and will take some time to recover it, much longer than your reading the help file believe me. Also MS , if called could walk you through it , much faster than doing the steps from a readme file. Luck

by michael.spellman

I found a utility that lets me assign available drive letters selectively. It seems to work great so far:

Letter Assigner v1.1
for Microsoft?Windows? 95/98.
(C) 2000 Vadim Burtyansky

This discussion is closed to new replies.