Question Locked

Static IP Address

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a site where we have to assign a server a static ip address. I have Netgear RP614v3 router hooked up how do I allow the static ip address to pass through the router so they can hit the internet?

4 replies

by ---tk---

If your hosting a website.. I would just port forward(80) and point it to the servers reserved IP address. If you need VPN use the default port and forward it on to the server.... ftp, same thing....

by ---tk---

What are you actually trying to do? other PC's in the network are going out? or do you want to direct traffic thats coming in?

by 45geek

Sounds like you are setting up a test/practice server....First private IP address are not routable out in the cloud. You shoud have NAT or PAT installed to resolve to your internal address then you will have to open a port if you want the outside to access your box. But if all you want is you box to get out then this should be resolved through NAT or PAT on your POP router. See your Network Admin to have them set this up for you as any time you open a pinhole (port) to the internet you potentially allow hackers into your network. If this is for a class or practice you should use a loopback address for this. Even if you have a static Public address for this box it should be discussed with your Network Admin so that it can pass through safeguards before letting access to the cloud such as a firewall, a proxy, a redirector proxy, etc...remember it is better to prevent an attack than recover from the damage caused by one.
Good Luck.

This discussion is closed to new replies.