Question Locked

Stymied

0 helpful
20 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

After reloading with my original retail CD of XP, updating for the umpteenth time and all that, checking msconfig frequently to see how things were proceeding, then screwing up royally (I will not admit in public just what or how), whereupon,

"Windows cannot find 'msconfig'..." accompanied by an alarming sound and a big red button scored with a white X

System Administrative Tools by means of Start Menu Properties, Advanced, cannot be made to appear

Same with, Help and Support, "Windows cannot find 'helpctr.exe'...

System Tools, System Information, gets me, "Help and Support Error: Windows cannot open Help and Support because a system service is not running" (and I had not gotten around at that time to fiddling with services)

What evil mechanism do I think what I think has seized me and how?

Compromised at boot?

20 replies

by ic-it

would likely assist in the diagnosis.

If it was an inadvertant visit to certain sites, than malware, trojans, or root kits would be suspect.

If it was tweaking gone wild, than perhaps a SFC /Scannow would restore sanity.

by jacemg

Check if there are any services that are being turned off or some that are foreign and should be disabled. Run > Services.msc

To manually remove programs from startup: Run > regedit

Then look in:
[HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Run]
[HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\RunOnce]
[HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\RunServices]
[HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\RunServicesOnce]
[HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Winlogon\Userinit]

[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run]
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\RunOnce]
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\RunServices]
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\RunServicesOnce]
[HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Windows]

Some malware may also be within the [Load] or [Run] sections of your WIN.INI file, found in the Windows directory.

by santeewelding

I'll go looking as soon as scannow is finished, which is taking a l-o-n-g time.

by rob miners

try this or let us know if you can't access the internet.

Follow the steps below with the System started and restarted in Safe Mode with Networking. Running in Safe Mode loads a minimal set of drivers for the Operating System. You can use these options to start Windows so that you can modify the registry or load or remove drivers.

With the new strains of Virus that have been created you may find it necessary to rename the executable files so that they will work. Rename mbam-setup.exe and then navigate to the install folder and rename mbam.exe. Do not change the files extension from .exe. Do the same with Spybot.

Removing malware from System Restore points
To remove the malware, you must first disable System Restore, then scan the system with up-to-date antivirus software - allowing it to clean, delete, or quarantine any viruses found. After the system has been disinfected, you may then re-enable System Restore. The steps for disabling System Restore vary, depending on whether the default Start Menu or the Classic Start Menu is being used.

Default Start Menu XP
If using the default Start Menu, click Start | Control Panel | Performance and Maintenance | System. Select the System Restore tab and check "Turn off System Restore".

Classic Start Menu XP
If using the Classic Start Menu, click Start | Settings | Control Panel and double-click the System icon. Select the System Restore tab and check "Turn off System Restore".

Vista
Start, right mouse click Computer and select Properties. Select Advanced System Properties, click contine and then System Protection. Untick the box nect to Local Disk C: and click on Turn System Restore off.

After scanning the system and removing the offending malware, re-enable System Restore by repeating the steps, this time removing the check from "Turn off System Restore".

Download Malwarebytes Anti-Malware, install it and update it.

Malwarebytes

* Double-click mbam-setup.exe and follow the prompts to install the program.
* At the end, be sure a checkmark is placed next to Update Malwarebytes' Anti-Malware and Launch Malwarebytes' Anti-Malware, then click Finish.
* If an update is found, it will download and install the latest version.
* Once the program has loaded, select Perform Quick Scan, then click Scan.
* When the scan is complete, click OK, then Show Results to view the results.
* Be sure that everything is checked, and click Remove Selected.

If you encounter any problems while downloading the updates, manually download them from here and just double-click on mbam-rules.exe to install.
mbam-rules

I would keep scanning with it until it is clean by closing out and rebooting and running it again.

Download Spybot - Search & Destroy and install it. Update it and run it.

Spybot

Also run this Rootkit Revealer GMer
http://www.gmer.net/index.php

FAQ
http://www.gmer.net/faq.php

Just to be on the safe side when you finish do an online scan with Bitdefender or Google for an online scanner.

http://www.bitdefender.com/scan8/ie.html

by santeewelding

Thank you for spending your time with my miserable excuse for secure computing.

I'll try the rootkit detector(s). I've had as many as three detectors installed in my paranoid past. See what happens when I relax?

The renaming dodge -- yes. Wilco.

Spybot -- oh, yes. That's what first alerted me. Installed it right after the MS updating.

Mbam -- Not only the paid pro version, but with a backup CD. Have run it in Safe Mode several times now, along with Revo Uninstaller and CCleaner. It was my misremembrance of the name, mbam, and the installation of a poseur, that got me into this trouble.

System Restore, I didn't mention, failed. It went all through its antics, to the time before I screwed up, and came back to say upon restart that it couldn't. It did appear in all those rapidly changing scan locations, though. I've since eliminated all restore points. I don't dare resume it until I'm sure.

I am able to access the internet. No wobbles noted. Only the disappearance of msconfig noted. Thanks to Jacemg, I can also finally access Services through the Run command.

If drilling down into Registry keys and other efforts don't work, then it's wipe time again. Only, smarter.

by ic-it

Turn off system restore, they like to hide there.
Another good one to try Super Anti-Spyware, usually between MBAM, Spybot and the Super, you can kill em all.
Then if you like, turn system restore back on.

by rob miners

If you think that all of the suggestions haven't worked and you do decide to wipe the hard drive do it with DBAN. It will clean the drive for you. I often run it on older drives that have been around for awhile and it gives them a new lease on life.

Darik's Boot and Nuke.

http://dban.sourceforge.net/

http://www.dban.org/documentation

Autonuke should do it.

by rob miners

turn on System Restore. It's always handy to be able to replace the Registry.

by santeewelding

While rooting around in the firewall settings of Windows Live OneCare (paid subscription until September) that -- and here is the name and the nemesis of my stupidity -- Malware RemovalBot was still listed as good to go, in spite of my every effort to extirpate it. So I killed that instance of it.

Still no change in calling up msconfig. No go.

Be careful. I could be a Typhoid Mary. Member, too, of a worldwide bot. That's what concerns me. That, and falling on my sword.

by boxfiddler Hot topic

I do regular Registry backups.
Start\Run\Regedit\File\Export
Be sure that My Computer is highlighted, as the export copies only that which is parcel of the hive selected.
I name the exports by date exported.

I have backup for System Restore. :)

by santeewelding

Yes. I do usually run a wipe floppy after changing the boot order. I did a nine-hour one, once.

My other trouble is that, being damned, I simply cannot get the bios boot order to behave. There are these brackets, signifying that each option is disabled...

There are just so many combinations and permutations possible with up, down, left, right arrows and the Enter key. I have exhausted them, I think.

It's an Asus. Online sources treat it as too elementary and trivial to get into.

by santeewelding

MB
Mfg: ASUSTek Computer INC
Model:A8N32-SLI-Deluxe
Version: Rev 1.xx
Serial Number: MB1234567890

BIOS
Vendor: American Megatrends Inc.
Version: 1103
Release Date: 2-Jan-2006

You honor me, Jacky. I hold custody of mine eyes, which are down at the moment, in abject subjugation.

by rob miners

we all started at the beginning and its been a real learning curve for me. See how you go with this and let us know if you need assistance.

Hold down the < Del > key during the boot process and enter BIOS setup to re-enter data.

The Boot menu items allow you to change the system boot options. Select an item then press < Enter > to display the sub-menu.

?? Select Item : use the up and down arrow keys
+- Change Field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit

Select Boot: For changing the system boot configuration

Select Boot Device Priority:
1st ~ xxth Boot Device [XXX Device]
These items specify the boot device priority sequence from the available devices. The number of device items that appear on the screen depends on the number of devices installed in the system.
Configuration options: [xxxxx Drive] [Disabled]

Boot Device Priority
1st Boot Device [1st FLOPPY DRIVE]
2nd Boot Device [ATAPI CD-ROM]
3rd Boot Device [HDD:PM-ST320423A]
4th Boot Device [Network: MBA

Santee don't forget to F10 Save and Exit after making the changes.

Edit: format again

by santeewelding

And put carefully into an old-fashioned manila folder with other advice here for when I wade into this thing again.

That will have to come after I rip out some Byzantine shower plumbing, reconfigure it, and reboot so I can enjoy hot water again.

Then there is some medical plumbing that needs attention.

I will prevail.

This discussion is closed to new replies.