Question Locked

Subnets

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I need your help!

I have a network (LAN)(over 200 PC) in one subnet 192.168.15.0
I need to devide it into 4 subneworks: 192.168.12.0; 192.168.13.0; 192.168.14.0; 192.168.15.0.
My Question: Do I need Routers to route packets between this subnetworks??

I think if i'll make 192.168.12.0/22 the clients with IP 192.168.12.1 will easy acces IP 192.168.15.1.

Am i right? Will i have problems??

THX!

5 replies

by daveo2000

Why do you need these on different subnets? Are you doing this to avoid security issues or just because you are approaching 256 PCs?

Do machines on one subnet need to talk to machines on another subnet? Could you get away with just setting up several of the PCs as gateways? How are you setting up DNS?

There really is a lot of missing information needed to answer this question. Enquiring minds want to know!

by juan18_c

If you are using a managed switch the best way is VLANs. once u have assigned a vlan to each subnet packets are routable between them so I recomended but as another viewer suggested please supply more info on ur network.

by syst3m.admin1strator

even with VLans you still need routing, this can either be achieved by using a router or using seperate ports on a VLan and using them to route by statically setting IP address on the ports.

either way you go about setting up subnets you will always have to do some routing.

This discussion is closed to new replies.